configure.in
author Sam Lantinga <slouken@libsdl.org>
Sat, 27 Jul 2013 03:20:09 -0700
changeset 7526 6c0f0280149c
parent 7507 885b4aab4190
child 7554 4b653ef6050d
permissions -rw-r--r--
Fixed bug 1272 - Bogus numlock key up/down events being reported on MacOS X Vern Jensen The problem is that in certain situations I'm getting THREE keyUp/keyDown events when I push certain keys. In my event code I added: case SDL_KEYUP: printf("SDL KeyScanCode for KEYUP event: %d\n", event->key.keysym.scancode ); … and case SDL_KEYDOWN: printf("SDL KeyScanCode for KEYDOWN event: %d\n", event->key.keysym.scancode ); … The result of one test run where I push 2 keys and then release them is this: SDL KeyScanCode for KEYDOWN event: 92 // Pushed keypad 4 SDL KeyScanCode for KEYDOWN event: 83 // Pushed left shift SDL KeyScanCode for KEYUP event: 83 SDL KeyScanCode for KEYDOWN event: 225 SDL KeyScanCode for KEYUP event: 92 // Released keypad 4 SDL KeyScanCode for KEYDOWN event: 83 SDL KeyScanCode for KEYUP event: 83 SDL KeyScanCode for KEYUP event: 225 // Released left shift There *should* be only a total of 4 events above… 2 for each key being pushed, and 2 for each being released. But instead some bogus events for numlock being pushed/released are sent from SDL. These events did not occur. I did not push numlock. The value above for numlock is 83. Comments above show when I pushed each key. As you can see, when I push left shift, THREE events are instantly sent to my application, keyDown and then keyUp for numlock, and then the valid event for left shift (the key that was actually pushed). You could replace keypad 4 with pretty much any keyPad key and it'll still happen. You can also replace it with any arrow key and it'll happen. However, when trying it with normal letter keys on the main keyboard it didn't. It happens with other modifier keys too, not just left shift. The order in which the keys are pressed matter. For instance, if I do: 1) keypad 4 2) left shift 3) release left shift 4) release keypad 4 Then at step 2, I get the 3 events above (when there should be only one), but steps 3 and 4 work properly… I don't get extra keyUp/keyDown events for steps 3 or 4. Thereas if the order of steps 3 and 4 are reversed, I get the bogus extra events for numlock. Also, the problem can occur even when pushing just a single key by itself. If I push left shift, then keypad 4, then release left shift, then release keypad 4, then the following push of left shift will cause the bug. If I continue pushing and releasing left shift though, it won't happen again until I again involve keypad keys. --- Sam Lantinga According to the Apple documentation, NSNumericPadKeyMask is set for any arrow or numeric keypad event. Indeed this is what's happening. I verified that we get the correct events for the numlock key and the mod state gets set correcly, so it should be safe to remove this bogus code.

dnl Process this file with autoconf to produce a configure script.
AC_INIT(README.txt)
AC_CONFIG_HEADER(include/SDL_config.h)
AC_CONFIG_AUX_DIR(build-scripts)
AC_CONFIG_MACRO_DIR([acinclude])

dnl Save the CFLAGS to see whether they were passed in or generated
orig_CFLAGS="$CFLAGS"

dnl Set various version strings - taken gratefully from the GTk sources
#
# Making releases:
# Edit include/SDL_version.h and change the version, then:
#   SDL_MICRO_VERSION += 1;
#   SDL_INTERFACE_AGE += 1;
#   SDL_BINARY_AGE += 1;
# if any functions have been added, set SDL_INTERFACE_AGE to 0.
# if backwards compatibility has been broken,
# set SDL_BINARY_AGE and SDL_INTERFACE_AGE to 0.
#
SDL_MAJOR_VERSION=2
SDL_MINOR_VERSION=0
SDL_MICRO_VERSION=0
SDL_INTERFACE_AGE=0
SDL_BINARY_AGE=0
SDL_VERSION=$SDL_MAJOR_VERSION.$SDL_MINOR_VERSION.$SDL_MICRO_VERSION

AC_SUBST(SDL_MAJOR_VERSION)
AC_SUBST(SDL_MINOR_VERSION)
AC_SUBST(SDL_MICRO_VERSION)
AC_SUBST(SDL_INTERFACE_AGE)
AC_SUBST(SDL_BINARY_AGE)
AC_SUBST(SDL_VERSION)

# libtool versioning
LT_INIT([win32-dll])

LT_RELEASE=$SDL_MAJOR_VERSION.$SDL_MINOR_VERSION
LT_CURRENT=`expr $SDL_MICRO_VERSION - $SDL_INTERFACE_AGE`
LT_REVISION=$SDL_INTERFACE_AGE
LT_AGE=`expr $SDL_BINARY_AGE - $SDL_INTERFACE_AGE`
m4_pattern_allow([^LT_])

AC_SUBST(LT_RELEASE)
AC_SUBST(LT_CURRENT)
AC_SUBST(LT_REVISION)
AC_SUBST(LT_AGE)

dnl Detect the canonical build and host environments
dnl AC_CANONICAL_HOST

dnl Check for tools
AC_PROG_LIBTOOL
AC_PROG_CC
AC_PROG_CXX
AC_PROG_INSTALL
AC_PROG_MAKE_SET
AC_CHECK_TOOL(WINDRES, [windres], [:])

dnl Make sure that srcdir is a full pathname
srcdir=`cd $srcdir && pwd`

dnl Set up the compiler and linker flags
INCLUDE="-I$srcdir/include"
if test x$srcdir != x.; then
    INCLUDE="-Iinclude $INCLUDE"
elif test -d .hg; then
    AC_MSG_ERROR([
*** When building from Mercurial you should configure and build in a
    separate directory so you don't clobber SDL_config.h, SDL_revision.h
])
fi
BASE_CFLAGS=""
BASE_LDFLAGS=""
case "$host" in
    *-*-cygwin*)
        # We build SDL on cygwin without the UNIX emulation layer
        save_CFLAGS="$CFLAGS"
        have_no_cygwin=no
        AC_MSG_CHECKING(for GCC -mno-cygwin option)
        CFLAGS="$save_CFLAGS -mno-cygwin"

        AC_TRY_COMPILE([
        ],[
        ],[
        have_no_cygwin=yes
        ])
        AC_MSG_RESULT($have_no_cygwin)
        CFLAGS="$save_CFLAGS"

        if test x$have_no_cygwin = xyes; then
            BASE_CFLAGS="-mno-cygwin"
            BASE_LDFLAGS="-mno-cygwin"
        fi
        BASE_CFLAGS="$BASE_CFLAGS -I/usr/include/mingw"
        ;;
esac
# Uncomment the following line if you want to force SDL and applications
# built with it to be compiled for a particular architecture.
#AX_GCC_ARCHFLAG([no], [BASE_CFLAGS="$BASE_CFLAGS $ax_cv_gcc_archflag]")
BUILD_CFLAGS="$CFLAGS $CPPFLAGS -DUSING_GENERATED_CONFIG_H"
# The default optimization for SDL is -O3 (Bug #31)
if test "x$orig_CFLAGS" = x; then
    BUILD_CFLAGS=`echo $BUILD_CFLAGS | sed 's/-O2/-O3/'`
fi
EXTRA_CFLAGS="$INCLUDE $BASE_CFLAGS"
BUILD_LDFLAGS="$LDFLAGS"
EXTRA_LDFLAGS="$BASE_LDFLAGS"
## These are common directories to find software packages
#for path in /usr/freeware /usr/pkg /usr/X11R6 /usr/local; do
#    if test -d $path/include; then
#        EXTRA_CFLAGS="$EXTRA_CFLAGS -I$path/include"
#    fi
#    if test -d $path/lib; then
#        EXTRA_LDFLAGS="$EXTRA_LDFLAGS -L$path/lib"
#    fi
#done
SDL_CFLAGS="$BASE_CFLAGS"
SDL_LIBS="-lSDL2 $BASE_LDFLAGS"
CPPFLAGS="$CPPFLAGS $EXTRA_CFLAGS"
CFLAGS="$CFLAGS $EXTRA_CFLAGS"
LDFLAGS="$LDFLAGS $EXTRA_LDFLAGS"

dnl set this to use on systems that use lib64 instead of lib
base_libdir=`echo \${libdir} | sed 's/.*\/\(.*\)/\1/; q'`

dnl Function to find a library in the compiler search path
find_lib()
{
    gcc_bin_path=[`$CC -print-search-dirs 2>/dev/null | fgrep programs: | sed 's/[^=]*=\(.*\)/\1/' | sed 's/:/ /g'`]
    gcc_lib_path=[`$CC -print-search-dirs 2>/dev/null | fgrep libraries: | sed 's/[^=]*=\(.*\)/\1/' | sed 's/:/ /g'`]
    env_lib_path=[`echo $LIBS $LDFLAGS $* | sed 's/-L[ ]*//g'`]
    if test "$cross_compiling" = yes; then
        host_lib_path=""
    else
        host_lib_path="/usr/$base_libdir /usr/local/$base_libdir"
    fi
    for path in $gcc_bin_path $gcc_lib_path $env_lib_path $host_lib_path; do
        lib=[`ls -- $path/$1 2>/dev/null | sed -e '/\.so\..*\./d' -e 's,.*/,,' | sort | tail -1`]
        if test x$lib != x; then
            echo $lib
            return
        fi
    done
}

dnl Check for compiler characteristics
AC_C_CONST
AC_C_INLINE
AC_C_VOLATILE

dnl See whether we want assertions for debugging/sanity checking SDL itself.
AC_ARG_ENABLE(assertions,
AC_HELP_STRING([--enable-assertions],
               [Enable internal sanity checks (auto/disabled/release/enabled/paranoid) [[default=auto]]]),
              , enable_assertions=auto)
case "$enable_assertions" in
    auto) # Use optimization settings to determine assertion level
        ;;
    disabled)
        AC_DEFINE(SDL_DEFAULT_ASSERT_LEVEL, 0, [ ])
        ;;
    release)
        AC_DEFINE(SDL_DEFAULT_ASSERT_LEVEL, 1, [ ])
        ;;
    enabled)
        AC_DEFINE(SDL_DEFAULT_ASSERT_LEVEL, 2, [ ])
        ;;
    paranoid)
        AC_DEFINE(SDL_DEFAULT_ASSERT_LEVEL, 3, [ ])
        ;;
    *)
        AC_MSG_ERROR([*** unknown assertion level. stop.])
        ;;
esac

dnl See whether we can use gcc style dependency tracking
AC_ARG_ENABLE(dependency-tracking,
AC_HELP_STRING([--enable-dependency-tracking],
               [Use gcc -MMD -MT dependency tracking [[default=yes]]]),
              , enable_dependency_tracking=yes)
if test x$enable_dependency_tracking = xyes; then
    have_gcc_mmd_mt=no
    AC_MSG_CHECKING(for GCC -MMD -MT option)
    AC_TRY_COMPILE([
    #if !defined(__GNUC__) || __GNUC__ < 3
    #error Dependency tracking requires GCC 3.0 or newer
    #endif
    ],[
    ],[
    have_gcc_mmd_mt=yes
    ])
    AC_MSG_RESULT($have_gcc_mmd_mt)

    if test x$have_gcc_mmd_mt = xyes; then
        DEPENDENCY_TRACKING_OPTIONS="-MMD -MT \$@"
    fi
fi

# Actually this doesn't work on OpenBSD and BeOS
#AC_MSG_CHECKING(for linker option --no-undefined)
#have_no_undefined=no
#save_LDFLAGS="$LDFLAGS"
#LDFLAGS="$LDFLAGS -Wl,--no-undefined"
#AC_TRY_LINK([
#],[
#],[
#have_no_undefined=yes
#EXTRA_LDFLAGS="$EXTRA_LDFLAGS -Wl,--no-undefined"
#])
#LDFLAGS="$save_LDFLAGS"
#AC_MSG_RESULT($have_no_undefined)

dnl See whether we are allowed to use the system C library
AC_ARG_ENABLE(libc,
AC_HELP_STRING([--enable-libc], [Use the system C library [[default=yes]]]),
              , enable_libc=yes)
if test x$enable_libc = xyes; then
    AC_DEFINE(HAVE_LIBC, 1, [ ])

    dnl Check for C library headers
    AC_HEADER_STDC
    AC_CHECK_HEADERS(sys/types.h stdio.h stdlib.h stddef.h stdarg.h malloc.h memory.h string.h strings.h inttypes.h stdint.h ctype.h math.h iconv.h signal.h)

    dnl Check for typedefs, structures, etc.
    AC_TYPE_SIZE_T

    dnl Check for defines
    AC_CHECK_DEFINE(M_PI, math.h)

    dnl Checks for library functions.
    case "$host" in
    *-*-cygwin* | *-*-mingw32*)
        ;;
    *)
        AC_FUNC_ALLOCA
        ;;
    esac

    AC_FUNC_MEMCMP
    if test x$ac_cv_func_memcmp_working = xyes; then
        AC_DEFINE(HAVE_MEMCMP, 1, [ ])
    fi
    AC_FUNC_STRTOD
    if test x$ac_cv_func_strtod = xyes; then
        AC_DEFINE(HAVE_STRTOD, 1, [ ])
    fi
    AC_CHECK_FUNC(mprotect,
        AC_TRY_COMPILE([
          #include <sys/types.h>
          #include <sys/mman.h>
        ],[
        ],[
        AC_DEFINE(HAVE_MPROTECT, 1, [ ])
        ]),
    )
    AC_CHECK_FUNCS(malloc calloc realloc free getenv setenv putenv unsetenv qsort abs bcopy memset memcpy memmove strlen strlcpy strlcat strdup _strrev _strupr _strlwr strchr strrchr strstr itoa _ltoa _uitoa _ultoa strtol strtoul _i64toa _ui64toa strtoll strtoull atoi atof strcmp strncmp _stricmp strcasecmp _strnicmp strncasecmp sscanf snprintf vsnprintf fseeko fseeko64 sigaction setjmp nanosleep sysconf sysctlbyname)

    AC_CHECK_LIB(m, pow, [LIBS="$LIBS -lm"; EXTRA_LDFLAGS="$EXTRA_LDFLAGS -lm"])
    AC_CHECK_FUNCS(atan atan2 ceil copysign cos cosf fabs floor log pow scalbn sin sinf sqrt)

    AC_CHECK_LIB(iconv, iconv_open, [LIBS="$LIBS -liconv"; EXTRA_LDFLAGS="$EXTRA_LDFLAGS -liconv"])
    AC_CHECK_FUNCS(iconv)

    AC_CHECK_MEMBER(struct sigaction.sa_sigaction,[AC_DEFINE(HAVE_SA_SIGACTION)], ,[#include <signal.h>])
fi

AC_CHECK_SIZEOF(void*)

dnl See whether we can use gcc atomic operations on this architecture
AC_ARG_ENABLE(gcc-atomics,
AC_HELP_STRING([--enable-gcc-atomics],
               [Use gcc builtin atomics [[default=yes]]]),
              , enable_gcc_atomics=yes)
if test x$enable_gcc_atomics = xyes; then
    have_gcc_atomics=no
    AC_MSG_CHECKING(for GCC builtin atomic operations)
    AC_TRY_LINK([
    ],[
    int a;
    void *x, *y, *z;
    __sync_lock_test_and_set(&a, 4);
    __sync_lock_test_and_set(&x, y);
    __sync_fetch_and_add(&a, 1);
    __sync_bool_compare_and_swap(&a, 5, 10);
    __sync_bool_compare_and_swap(&x, y, z);
    ],[
    have_gcc_atomics=yes
    ])
    AC_MSG_RESULT($have_gcc_atomics)

    if test x$have_gcc_atomics = xyes; then
        AC_DEFINE(HAVE_GCC_ATOMICS, 1, [ ])
    else
        # See if we have the minimum operation needed for GCC atomics
        AC_TRY_LINK([
        ],[
        int a;
        __sync_lock_test_and_set(&a, 1);
        __sync_lock_release(&a);
        ],[
        have_gcc_sync_lock_test_and_set=yes
        ])
        if test x$have_gcc_sync_lock_test_and_set = xyes; then
            AC_DEFINE(HAVE_GCC_SYNC_LOCK_TEST_AND_SET, 1, [ ])
        fi
    fi
fi

# Standard C sources
SOURCES="$SOURCES $srcdir/src/*.c"
SOURCES="$SOURCES $srcdir/src/atomic/*.c"
SOURCES="$SOURCES $srcdir/src/audio/*.c"
SOURCES="$SOURCES $srcdir/src/cpuinfo/*.c"
SOURCES="$SOURCES $srcdir/src/events/*.c"
SOURCES="$SOURCES $srcdir/src/file/*.c"
SOURCES="$SOURCES $srcdir/src/haptic/*.c"
SOURCES="$SOURCES $srcdir/src/joystick/*.c"
SOURCES="$SOURCES $srcdir/src/libm/*.c"
SOURCES="$SOURCES $srcdir/src/power/*.c"
SOURCES="$SOURCES $srcdir/src/render/*.c"
SOURCES="$SOURCES $srcdir/src/render/*/*.c"
SOURCES="$SOURCES $srcdir/src/stdlib/*.c"
SOURCES="$SOURCES $srcdir/src/thread/*.c"
SOURCES="$SOURCES $srcdir/src/timer/*.c"
SOURCES="$SOURCES $srcdir/src/video/*.c"

dnl Enable/disable various subsystems of the SDL library

AC_ARG_ENABLE(atomic,
AC_HELP_STRING([--enable-atomic], [Enable the atomic operations subsystem [[default=yes]]]),
              , enable_atomic=yes)
if test x$enable_atomic != xyes; then
    AC_DEFINE(SDL_ATOMIC_DISABLED, 1, [ ])
fi
AC_ARG_ENABLE(audio,
AC_HELP_STRING([--enable-audio], [Enable the audio subsystem [[default=yes]]]),
              , enable_audio=yes)
if test x$enable_audio != xyes; then
    AC_DEFINE(SDL_AUDIO_DISABLED, 1, [ ])
fi
AC_ARG_ENABLE(video,
AC_HELP_STRING([--enable-video], [Enable the video subsystem [[default=yes]]]),
              , enable_video=yes)
if test x$enable_video != xyes; then
    AC_DEFINE(SDL_VIDEO_DISABLED, 1, [ ])
fi
AC_ARG_ENABLE(render,
AC_HELP_STRING([--enable-render], [Enable the render subsystem [[default=yes]]]),
              , enable_render=yes)
if test x$enable_render != xyes; then
    AC_DEFINE(SDL_RENDER_DISABLED, 1, [ ])
fi
AC_ARG_ENABLE(events,
AC_HELP_STRING([--enable-events], [Enable the events subsystem [[default=yes]]]),
              , enable_events=yes)
if test x$enable_events != xyes; then
    AC_DEFINE(SDL_EVENTS_DISABLED, 1, [ ])
fi
AC_ARG_ENABLE(joystick,
AC_HELP_STRING([--enable-joystick], [Enable the joystick subsystem [[default=yes]]]),
              , enable_joystick=yes)
if test x$enable_joystick != xyes; then
    AC_DEFINE(SDL_JOYSTICK_DISABLED, 1, [ ])
fi
AC_ARG_ENABLE(haptic,
AC_HELP_STRING([--enable-haptic], [Enable the haptic (force feedback) subsystem [[default=yes]]]),
              , enable_haptic=yes)
if test x$enable_haptic != xyes; then
    AC_DEFINE(SDL_HAPTIC_DISABLED, 1, [ ])
fi
AC_ARG_ENABLE(power,
AC_HELP_STRING([--enable-power], [Enable the power subsystem [[default=yes]]]),
              , enable_power=yes)
if test x$enable_power != xyes; then
    AC_DEFINE(SDL_POWER_DISABLED, 1, [ ])
fi
AC_ARG_ENABLE(threads,
AC_HELP_STRING([--enable-threads], [Enable the threading subsystem [[default=yes]]]),
              , enable_threads=yes)
if test x$enable_threads != xyes; then
    AC_DEFINE(SDL_THREADS_DISABLED, 1, [ ])
fi
AC_ARG_ENABLE(timers,
AC_HELP_STRING([--enable-timers], [Enable the timer subsystem [[default=yes]]]),
              , enable_timers=yes)
if test x$enable_timers != xyes; then
    AC_DEFINE(SDL_TIMERS_DISABLED, 1, [ ])
fi
AC_ARG_ENABLE(file,
AC_HELP_STRING([--enable-file], [Enable the file subsystem [[default=yes]]]),
              , enable_file=yes)
if test x$enable_file != xyes; then
    AC_DEFINE(SDL_FILE_DISABLED, 1, [ ])
fi
AC_ARG_ENABLE(loadso,
AC_HELP_STRING([--enable-loadso], [Enable the shared object loading subsystem [[default=yes]]]),
              , enable_loadso=yes)
if test x$enable_loadso != xyes; then
    AC_DEFINE(SDL_LOADSO_DISABLED, 1, [ ])
fi
AC_ARG_ENABLE(cpuinfo,
AC_HELP_STRING([--enable-cpuinfo], [Enable the cpuinfo subsystem [[default=yes]]]),
              , enable_cpuinfo=yes)
if test x$enable_cpuinfo != xyes; then
    AC_DEFINE(SDL_CPUINFO_DISABLED, 1, [ ])
fi
AC_ARG_ENABLE(atomic,
AC_HELP_STRING([--enable-atomic], [Enable the atomic operations [[default=yes]]]),
              , enable_atomic=yes)
if test x$enable_atomic != xyes; then
    AC_DEFINE(SDL_ATOMIC_DISABLED, 1, [ ])
fi
AC_ARG_ENABLE(assembly,
AC_HELP_STRING([--enable-assembly], [Enable assembly routines [[default=yes]]]),
              , enable_assembly=yes)
if test x$enable_assembly = xyes; then
    AC_DEFINE(SDL_ASSEMBLY_ROUTINES, 1, [ ])

    # Make sure that we don't generate floating point code that would
    # cause illegal instruction exceptions on older processors
    case "$host" in
        *-*-darwin*)
            # Don't need to worry about Apple hardware, it's all SSE capable
            default_ssemath=yes
            ;;
        *64-*-*)
            # x86 64-bit architectures all have SSE instructions
            default_ssemath=yes
            ;;
        *)
            default_ssemath=no
            ;;
    esac
    AC_ARG_ENABLE(ssemath,
AC_HELP_STRING([--enable-ssemath], [Allow GCC to use SSE floating point math [[default=no]]]),
                  , enable_ssemath=$default_ssemath)
    if test x$enable_ssemath = xno; then
        if test x$have_gcc_sse = xyes -o x$have_gcc_sse2 = xyes; then
            EXTRA_CFLAGS="$EXTRA_CFLAGS -mfpmath=387"
        fi
    fi

    dnl Check for various instruction support
    AC_ARG_ENABLE(mmx,
AC_HELP_STRING([--enable-mmx], [use MMX assembly routines [[default=yes]]]),
                  , enable_mmx=yes)
    if test x$enable_mmx = xyes; then
        save_CFLAGS="$CFLAGS"
        have_gcc_mmx=no
        AC_MSG_CHECKING(for GCC -mmmx option)
        mmx_CFLAGS="-mmmx"
        CFLAGS="$save_CFLAGS $mmx_CFLAGS"

        AC_TRY_COMPILE([
        #ifdef __MINGW32__
        #include <_mingw.h>
        #ifdef __MINGW64_VERSION_MAJOR
        #include <intrin.h>
        #else
        #include <mmintrin.h>
        #endif
        #else
        #include <mmintrin.h>
        #endif
        #ifndef __MMX__
        #error Assembler CPP flag not enabled
        #endif
        ],[
        ],[
        have_gcc_mmx=yes
        ])
        AC_MSG_RESULT($have_gcc_mmx)
        CFLAGS="$save_CFLAGS"

        if test x$have_gcc_mmx = xyes; then
            EXTRA_CFLAGS="$EXTRA_CFLAGS $mmx_CFLAGS"
        fi
    fi

    AC_ARG_ENABLE(3dnow,
AC_HELP_STRING([--enable-3dnow], [use 3DNow! assembly routines [[default=yes]]]),
                  , enable_3dnow=yes)
    if test x$enable_3dnow = xyes; then
        save_CFLAGS="$CFLAGS"
        have_gcc_3dnow=no
        AC_MSG_CHECKING(for GCC -m3dnow option)
        amd3dnow_CFLAGS="-m3dnow"
        CFLAGS="$save_CFLAGS $amd3dnow_CFLAGS"

        AC_TRY_LINK([
        #include <mm3dnow.h>
        #ifndef __3dNOW__
        #error Assembler CPP flag not enabled
        #endif
        ],[
        void *p = 0;
        _m_prefetch(p);
        ],[
        have_gcc_3dnow=yes
        ])
        AC_MSG_RESULT($have_gcc_3dnow)
        CFLAGS="$save_CFLAGS"

        if test x$have_gcc_3dnow = xyes; then
            EXTRA_CFLAGS="$EXTRA_CFLAGS $amd3dnow_CFLAGS"
        fi
    fi

    AC_ARG_ENABLE(sse,
AC_HELP_STRING([--enable-sse], [use SSE assembly routines [[default=yes]]]),
                  , enable_sse=yes)
    if test x$enable_sse = xyes; then
        save_CFLAGS="$CFLAGS"
        have_gcc_sse=no
        AC_MSG_CHECKING(for GCC -msse option)
        sse_CFLAGS="-msse"
        CFLAGS="$save_CFLAGS $sse_CFLAGS"

        AC_TRY_COMPILE([
        #ifdef __MINGW32__
        #include <_mingw.h>
        #ifdef __MINGW64_VERSION_MAJOR
        #include <intrin.h>
        #else
        #include <xmmintrin.h>
        #endif
        #else
        #include <xmmintrin.h>
        #endif
        #ifndef __SSE__
        #error Assembler CPP flag not enabled
        #endif
        ],[
        ],[
        have_gcc_sse=yes
        ])
        AC_MSG_RESULT($have_gcc_sse)
        CFLAGS="$save_CFLAGS"

        if test x$have_gcc_sse = xyes; then
            EXTRA_CFLAGS="$EXTRA_CFLAGS $sse_CFLAGS"
        fi
    fi

    AC_ARG_ENABLE(sse2,
AC_HELP_STRING([--enable-sse2], [use SSE2 assembly routines [[default=no]]]),
                  , enable_sse2=$default_ssemath)
    if test x$enable_sse2 = xyes; then
        save_CFLAGS="$CFLAGS"
        have_gcc_sse2=no
        AC_MSG_CHECKING(for GCC -msse2 option)
        sse2_CFLAGS="-msse2"
        CFLAGS="$save_CFLAGS $sse2_CFLAGS"

        AC_TRY_COMPILE([
        #ifdef __MINGW32__
        #include <_mingw.h>
        #ifdef __MINGW64_VERSION_MAJOR
        #include <intrin.h>
        #else
        #include <emmintrin.h>
        #endif
        #else
        #include <emmintrin.h>
        #endif
        #ifndef __SSE2__
        #error Assembler CPP flag not enabled
        #endif
        ],[
        ],[
        have_gcc_sse2=yes
        ])
        AC_MSG_RESULT($have_gcc_sse2)
        CFLAGS="$save_CFLAGS"

        if test x$have_gcc_sse2 = xyes; then
            EXTRA_CFLAGS="$EXTRA_CFLAGS $sse2_CFLAGS"
        fi
    fi

    AC_ARG_ENABLE(altivec,
AC_HELP_STRING([--enable-altivec], [use Altivec assembly routines [[default=yes]]]),
                  , enable_altivec=yes)
    if test x$enable_altivec = xyes; then
        save_CFLAGS="$CFLAGS"
        have_gcc_altivec=no
        have_altivec_h_hdr=no
        altivec_CFLAGS="-maltivec"
        CFLAGS="$save_CFLAGS $altivec_CFLAGS"

        AC_MSG_CHECKING(for Altivec with GCC altivec.h and -maltivec option)
        AC_TRY_COMPILE([
        #include <altivec.h>
        vector unsigned int vzero() {
            return vec_splat_u32(0);
        }
        ],[
        ],[
        have_gcc_altivec=yes
        have_altivec_h_hdr=yes
        ])
        AC_MSG_RESULT($have_gcc_altivec)

        if test x$have_gcc_altivec = xno; then
            AC_MSG_CHECKING(for Altivec with GCC -maltivec option)
            AC_TRY_COMPILE([
            vector unsigned int vzero() {
                return vec_splat_u32(0);
            }
            ],[
            ],[
            have_gcc_altivec=yes
            ])
            AC_MSG_RESULT($have_gcc_altivec)
        fi

        if test x$have_gcc_altivec = xno; then
            AC_MSG_CHECKING(for Altivec with GCC altivec.h and -faltivec option)
            altivec_CFLAGS="-faltivec"
            CFLAGS="$save_CFLAGS $altivec_CFLAGS"
            AC_TRY_COMPILE([
            #include <altivec.h>
            vector unsigned int vzero() {
                return vec_splat_u32(0);
            }
            ],[
            ],[
            have_gcc_altivec=yes
            have_altivec_h_hdr=yes
            ])
            AC_MSG_RESULT($have_gcc_altivec)
        fi

        if test x$have_gcc_altivec = xno; then
            AC_MSG_CHECKING(for Altivec with GCC -faltivec option)
            AC_TRY_COMPILE([
            vector unsigned int vzero() {
                return vec_splat_u32(0);
            }
            ],[
            ],[
            have_gcc_altivec=yes
            ])
            AC_MSG_RESULT($have_gcc_altivec)
        fi
        CFLAGS="$save_CFLAGS"

        if test x$have_gcc_altivec = xyes; then
            AC_DEFINE(SDL_ALTIVEC_BLITTERS, 1, [ ])
            if test x$have_altivec_h_hdr = xyes; then
              AC_DEFINE(HAVE_ALTIVEC_H, 1, [ ])
            fi
            EXTRA_CFLAGS="$EXTRA_CFLAGS $altivec_CFLAGS"
        fi
    fi
fi

dnl See if the OSS audio interface is supported
CheckOSS()
{
    AC_ARG_ENABLE(oss,
AC_HELP_STRING([--enable-oss], [support the OSS audio API [[default=maybe]]]),
                  , enable_oss=maybe)

    # OpenBSD "has" OSS, but it's not really for app use. They want you to
    #  use sndio instead. So on there, we default to disabled. You can force
    #  it on if you really want, though.
    if test x$enable_oss = xmaybe; then
        enable_oss=yes
        case "$host" in
            *-*-openbsd*)
                enable_oss=no;;
        esac
    fi

    if test x$enable_audio = xyes -a x$enable_oss = xyes; then
        AC_MSG_CHECKING(for OSS audio support)
        have_oss=no
        if test x$have_oss != xyes; then
            AC_TRY_COMPILE([
              #include <sys/soundcard.h>
            ],[
              int arg = SNDCTL_DSP_SETFRAGMENT;
            ],[
            have_oss=yes
            ])
        fi
        if test x$have_oss != xyes; then
            AC_TRY_COMPILE([
              #include <soundcard.h>
            ],[
              int arg = SNDCTL_DSP_SETFRAGMENT;
            ],[
            have_oss=yes
            AC_DEFINE(SDL_AUDIO_DRIVER_OSS_SOUNDCARD_H, 1, [ ])
            ])
        fi
        AC_MSG_RESULT($have_oss)
        if test x$have_oss = xyes; then
            AC_DEFINE(SDL_AUDIO_DRIVER_OSS, 1, [ ])
            SOURCES="$SOURCES $srcdir/src/audio/dsp/*.c"
            have_audio=yes

            # We may need to link with ossaudio emulation library
            case "$host" in
                *-*-openbsd*|*-*-netbsd*)
                    EXTRA_LDFLAGS="$EXTRA_LDFLAGS -lossaudio";;
            esac
        fi
    fi
}

dnl See if the ALSA audio interface is supported
CheckALSA()
{
    AC_ARG_ENABLE(alsa,
AC_HELP_STRING([--enable-alsa], [support the ALSA audio API [[default=yes]]]),
                  , enable_alsa=yes)
    if test x$enable_audio = xyes -a x$enable_alsa = xyes; then
        AM_PATH_ALSA(0.9.0, have_alsa=yes, have_alsa=no)
        # Restore all flags from before the ALSA detection runs
        CFLAGS="$alsa_save_CFLAGS"
        LDFLAGS="$alsa_save_LDFLAGS"
        LIBS="$alsa_save_LIBS"
        if test x$have_alsa = xyes; then
            AC_ARG_ENABLE(alsa-shared,
AC_HELP_STRING([--enable-alsa-shared], [dynamically load ALSA audio support [[default=yes]]]),
                          , enable_alsa_shared=yes)
            alsa_lib=[`find_lib "libasound.so.*" "$ALSA_LIBS" | sed 's/.*\/\(.*\)/\1/; q'`]

            AC_DEFINE(SDL_AUDIO_DRIVER_ALSA, 1, [ ])
            SOURCES="$SOURCES $srcdir/src/audio/alsa/*.c"
            EXTRA_CFLAGS="$EXTRA_CFLAGS $ALSA_CFLAGS"
            if test x$have_loadso != xyes && \
               test x$enable_alsa_shared = xyes; then
                AC_MSG_WARN([You must have SDL_LoadObject() support for dynamic ALSA loading])
            fi
            if test x$have_loadso = xyes && \
               test x$enable_alsa_shared = xyes && test x$alsa_lib != x; then
                echo "-- dynamic libasound -> $alsa_lib"
                AC_DEFINE_UNQUOTED(SDL_AUDIO_DRIVER_ALSA_DYNAMIC, "$alsa_lib", [ ])
            else
                EXTRA_LDFLAGS="$EXTRA_LDFLAGS $ALSA_LIBS"
            fi
            have_audio=yes
        fi
    fi
}

dnl Find the ESD includes and libraries
CheckESD()
{
    AC_ARG_ENABLE(esd,
AC_HELP_STRING([--enable-esd], [support the Enlightened Sound Daemon [[default=yes]]]),
                  , enable_esd=yes)
    if test x$enable_audio = xyes -a x$enable_esd = xyes; then
        AM_PATH_ESD(0.2.8, have_esd=yes, have_esd=no)
        if test x$have_esd = xyes; then
            AC_ARG_ENABLE(esd-shared,
AC_HELP_STRING([--enable-esd-shared], [dynamically load ESD audio support [[default=yes]]]),
                          , enable_esd_shared=yes)
            esd_lib=[`find_lib "libesd.so.*" "$ESD_LIBS" | sed 's/.*\/\(.*\)/\1/; q'`]

            AC_DEFINE(SDL_AUDIO_DRIVER_ESD, 1, [ ])
            SOURCES="$SOURCES $srcdir/src/audio/esd/*.c"
            EXTRA_CFLAGS="$EXTRA_CFLAGS $ESD_CFLAGS"
            if test x$have_loadso != xyes && \
               test x$enable_esd_shared = xyes; then
                AC_MSG_WARN([You must have SDL_LoadObject() support for dynamic ESD loading])
            fi
            if test x$have_loadso = xyes && \
               test x$enable_esd_shared = xyes && test x$esd_lib != x; then
                echo "-- dynamic libesd -> $esd_lib"
                AC_DEFINE_UNQUOTED(SDL_AUDIO_DRIVER_ESD_DYNAMIC, "$esd_lib", [ ])
            else
                EXTRA_LDFLAGS="$EXTRA_LDFLAGS $ESD_LIBS"
            fi
            have_audio=yes
        fi
    fi
}

dnl Find PulseAudio
CheckPulseAudio()
{
    AC_ARG_ENABLE(pulseaudio,
AC_HELP_STRING([--enable-pulseaudio], [use PulseAudio [[default=yes]]]),
                  , enable_pulseaudio=yes)
    if test x$enable_audio = xyes -a x$enable_pulseaudio = xyes; then
        audio_pulseaudio=no

        PULSEAUDIO_REQUIRED_VERSION=0.9

        AC_PATH_PROG(PKG_CONFIG, pkg-config, no)
        AC_MSG_CHECKING(for PulseAudio $PULSEAUDIO_REQUIRED_VERSION support)
        if test x$PKG_CONFIG != xno; then
        if $PKG_CONFIG --atleast-pkgconfig-version 0.7 && $PKG_CONFIG --atleast-version $PULSEAUDIO_REQUIRED_VERSION libpulse-simple; then
                PULSEAUDIO_CFLAGS=`$PKG_CONFIG --cflags libpulse-simple`
                PULSEAUDIO_LIBS=`$PKG_CONFIG --libs libpulse-simple`
                audio_pulseaudio=yes
            fi
        fi
        AC_MSG_RESULT($audio_pulseaudio)

        if test x$audio_pulseaudio = xyes; then
            AC_ARG_ENABLE(pulseaudio-shared,
AC_HELP_STRING([--enable-pulseaudio-shared], [dynamically load PulseAudio support [[default=yes]]]),
                          , enable_pulseaudio_shared=yes)
            pulseaudio_lib=[`find_lib "libpulse-simple.so.*" "$PULSEAUDIO_LIBS" | sed 's/.*\/\(.*\)/\1/; q'`]

            AC_DEFINE(SDL_AUDIO_DRIVER_PULSEAUDIO, 1, [ ])
            SOURCES="$SOURCES $srcdir/src/audio/pulseaudio/*.c"
            EXTRA_CFLAGS="$EXTRA_CFLAGS $PULSEAUDIO_CFLAGS"
            if test x$have_loadso != xyes && \
               test x$enable_pulseaudio_shared = xyes; then
                AC_MSG_WARN([You must have SDL_LoadObject() support for dynamic PulseAudio loading])
            fi
            if test x$have_loadso = xyes && \
               test x$enable_pulseaudio_shared = xyes && test x$pulseaudio_lib != x; then
                echo "-- dynamic libpulse-simple -> $pulseaudio_lib"
                AC_DEFINE_UNQUOTED(SDL_AUDIO_DRIVER_PULSEAUDIO_DYNAMIC, "$pulseaudio_lib", [ ])

                case "$host" in
                    # On Solaris, pulseaudio must be linked deferred explicitly
                    # to prevent undefined symbol failures.
                    *-*-solaris*)
                        PULSEAUDIO_LIBS=`echo $PULSEAUDIO_LIBS | sed 's/\-l/-Wl,-l/g'`
                        EXTRA_LDFLAGS="$EXTRA_LDFLAGS -Wl,-zdeferred $PULSEAUDIO_LIBS -Wl,-znodeferred"
                esac
            else
                EXTRA_LDFLAGS="$EXTRA_LDFLAGS $PULSEAUDIO_LIBS"
            fi
            have_audio=yes
        fi
    fi
}

CheckARTSC()
{
    AC_ARG_ENABLE(arts,
AC_HELP_STRING([--enable-arts], [support the Analog Real Time Synthesizer [[default=yes]]]),
                  , enable_arts=yes)
    if test x$enable_audio = xyes -a x$enable_arts = xyes; then
        AC_PATH_PROG(ARTSCONFIG, artsc-config)
        if test x$ARTSCONFIG = x -o x$ARTSCONFIG = x'"$ARTSCONFIG"'; then
            : # arts isn't installed
        else
            ARTS_CFLAGS=`$ARTSCONFIG --cflags`
            ARTS_LIBS=`$ARTSCONFIG --libs`
            AC_MSG_CHECKING(for aRts development environment)
            audio_arts=no
            save_CFLAGS="$CFLAGS"
            CFLAGS="$CFLAGS $ARTS_CFLAGS"
            AC_TRY_COMPILE([
             #include <artsc.h>
            ],[
             arts_stream_t stream;
            ],[
            audio_arts=yes
            ])
            CFLAGS="$save_CFLAGS"
            AC_MSG_RESULT($audio_arts)
            if test x$audio_arts = xyes; then
                AC_ARG_ENABLE(arts-shared,
AC_HELP_STRING([--enable-arts-shared], [dynamically load aRts audio support [[default=yes]]]),
                              , enable_arts_shared=yes)
                arts_lib=[`find_lib "libartsc.so.*" "$ARTS_LIBS" | sed 's/.*\/\(.*\)/\1/; q'`]

                AC_DEFINE(SDL_AUDIO_DRIVER_ARTS, 1, [ ])
                SOURCES="$SOURCES $srcdir/src/audio/arts/*.c"
                EXTRA_CFLAGS="$EXTRA_CFLAGS $ARTS_CFLAGS"
                if test x$have_loadso != xyes && \
                   test x$enable_arts_shared = xyes; then
                    AC_MSG_WARN([You must have SDL_LoadObject() support for dynamic ARTS loading])
                fi
                if test x$have_loadso = xyes && \
                   test x$enable_arts_shared = xyes && test x$arts_lib != x; then
                    echo "-- dynamic libartsc -> $arts_lib"
                    AC_DEFINE_UNQUOTED(SDL_AUDIO_DRIVER_ARTS_DYNAMIC, "$arts_lib", [ ])
                else
                    EXTRA_LDFLAGS="$EXTRA_LDFLAGS $ARTS_LIBS"
                fi
                have_audio=yes
            fi
        fi
    fi
}

dnl See if the NAS audio interface is supported
CheckNAS()
{
    AC_ARG_ENABLE(nas,
AC_HELP_STRING([--enable-nas], [support the NAS audio API [[default=yes]]]),
                  , enable_nas=yes)
    if test x$enable_audio = xyes -a x$enable_nas = xyes; then
        AC_CHECK_HEADER(audio/audiolib.h, have_nas_hdr=yes)
        AC_CHECK_LIB(audio, AuOpenServer, have_nas_lib=yes)

        AC_MSG_CHECKING(for NAS audio support)
        have_nas=no

        if test x$have_nas_hdr = xyes -a x$have_nas_lib = xyes; then
            have_nas=yes
            NAS_LIBS="-laudio"

        elif test -r /usr/X11R6/include/audio/audiolib.h; then
            have_nas=yes
            NAS_CFLAGS="-I/usr/X11R6/include/"
            NAS_LIBS="-L/usr/X11R6/lib -laudio -lXt"

        fi

        AC_MSG_RESULT($have_nas)

        if test x$have_nas = xyes; then
            AC_ARG_ENABLE(nas-shared,
AC_HELP_STRING([--enable-nas-shared], [dynamically load NAS audio support [[default=yes]]]),
                          , enable_nas_shared=yes)
            nas_lib=[`find_lib "libaudio.so.*" "$NAS_LIBS" | sed 's/.*\/\(.*\)/\1/; q'`]

            if test x$have_loadso != xyes && \
               test x$enable_nas_shared = xyes; then
                AC_MSG_WARN([You must have SDL_LoadObject() support for dynamic NAS loading])
            fi
            if test x$have_loadso = xyes && \
               test x$enable_nas_shared = xyes && test x$nas_lib != x; then
                echo "-- dynamic libaudio -> $nas_lib"
                AC_DEFINE_UNQUOTED(SDL_AUDIO_DRIVER_NAS_DYNAMIC, "$nas_lib", [ ])
            else
                EXTRA_LDFLAGS="$EXTRA_LDFLAGS $NAS_LIBS"
            fi

            AC_DEFINE(SDL_AUDIO_DRIVER_NAS, 1, [ ])
            SOURCES="$SOURCES $srcdir/src/audio/nas/*.c"
            EXTRA_CFLAGS="$EXTRA_CFLAGS $NAS_CFLAGS"
            have_audio=yes
        fi
    fi
}

dnl See if the sndio audio interface is supported
CheckSNDIO()
{
    AC_ARG_ENABLE(sndio,
AC_HELP_STRING([--enable-sndio], [support the sndio audio API [[default=yes]]]),
                  , enable_sndio=yes)
    if test x$enable_audio = xyes -a x$enable_sndio = xyes; then
        AC_CHECK_HEADER(sndio.h, have_sndio_hdr=yes)
        AC_CHECK_LIB(sndio, sio_open, have_sndio_lib=yes)

        AC_MSG_CHECKING(for sndio audio support)
        have_sndio=no

        if test x$have_sndio_hdr = xyes -a x$have_sndio_lib = xyes; then
            have_sndio=yes
            SNDIO_LIBS="-lsndio"
        fi

        AC_MSG_RESULT($have_sndio)

        if test x$have_sndio = xyes; then
            AC_ARG_ENABLE(sndio-shared,
AC_HELP_STRING([--enable-sndio-shared], [dynamically load sndio audio support [[default=yes]]]),
                          , enable_sndio_shared=yes)
            sndio_lib=[`find_lib "libsndio.so.*" "$SNDIO_LIBS" | sed 's/.*\/\(.*\)/\1/; q'`]

            if test x$have_loadso != xyes && \
               test x$enable_sndio_shared = xyes; then
                AC_MSG_WARN([You must have SDL_LoadObject() support for dynamic sndio loading])
            fi
            if test x$have_loadso = xyes && \
               test x$enable_sndio_shared = xyes && test x$sndio_lib != x; then
                echo "-- dynamic libsndio -> $sndio_lib"
                AC_DEFINE_UNQUOTED(SDL_AUDIO_DRIVER_SNDIO_DYNAMIC, "$sndio_lib", [ ])
            else
                EXTRA_LDFLAGS="$EXTRA_LDFLAGS $SNDIO_LIBS"
            fi

            AC_DEFINE(SDL_AUDIO_DRIVER_SNDIO, 1, [ ])
            SOURCES="$SOURCES $srcdir/src/audio/sndio/*.c"
            EXTRA_CFLAGS="$EXTRA_CFLAGS $SNDIO_CFLAGS"
            have_audio=yes
        fi
    fi
}

dnl rcg07142001 See if the user wants the disk writer audio driver...
CheckDiskAudio()
{
    AC_ARG_ENABLE(diskaudio,
AC_HELP_STRING([--enable-diskaudio], [support the disk writer audio driver [[default=yes]]]),
                  , enable_diskaudio=yes)
    if test x$enable_audio = xyes -a x$enable_diskaudio = xyes; then
        AC_DEFINE(SDL_AUDIO_DRIVER_DISK, 1, [ ])
        SOURCES="$SOURCES $srcdir/src/audio/disk/*.c"
    fi
}

dnl rcg03142006 See if the user wants the dummy audio driver...
CheckDummyAudio()
{
    AC_ARG_ENABLE(dummyaudio,
AC_HELP_STRING([--enable-dummyaudio], [support the dummy audio driver [[default=yes]]]),
                  , enable_dummyaudio=yes)
    if test x$enable_audio = xyes -a x$enable_dummyaudio = xyes; then
        AC_DEFINE(SDL_AUDIO_DRIVER_DUMMY, 1, [ ])
        SOURCES="$SOURCES $srcdir/src/audio/dummy/*.c"
    fi
}

dnl See if GCC's -fvisibility=hidden is supported (gcc4 and later, usually).
dnl  Details of this flag are here: http://gcc.gnu.org/wiki/Visibility
CheckVisibilityHidden()
{
    AC_MSG_CHECKING(for GCC -fvisibility=hidden option)
    have_gcc_fvisibility=no

    visibility_CFLAGS="-fvisibility=hidden"
    save_CFLAGS="$CFLAGS"
    CFLAGS="$save_CFLAGS $visibility_CFLAGS -Werror"
    AC_TRY_COMPILE([
    #if !defined(__GNUC__) || __GNUC__ < 4
    #error SDL only uses visibility attributes in GCC 4 or newer
    #endif
    ],[
    ],[
    have_gcc_fvisibility=yes
    ])
    AC_MSG_RESULT($have_gcc_fvisibility)
    CFLAGS="$save_CFLAGS"

    if test x$have_gcc_fvisibility = xyes; then
        EXTRA_CFLAGS="$EXTRA_CFLAGS $visibility_CFLAGS"
    fi
}

dnl See if GCC's -mpreferred-stack-boundary is supported.
dnl  Reference: http://bugzilla.libsdl.org/show_bug.cgi?id=1296
CheckStackBoundary()
{
    AC_MSG_CHECKING(for GCC -mpreferred-stack-boundary option)
    have_gcc_preferred_stack_boundary=no

    save_CFLAGS="$CFLAGS"
    CFLAGS="$save_CFLAGS -mpreferred-stack-boundary=2"
    AC_TRY_COMPILE([
    int x = 0;
    ],[
    ],[
    have_gcc_preferred_stack_boundary=yes
    ])
    AC_MSG_RESULT($have_gcc_preferred_stack_boundary)
    CFLAGS="$save_CFLAGS"

    if test x$have_gcc_preferred_stack_boundary = xyes; then
        EXTRA_CFLAGS="$EXTRA_CFLAGS -mpreferred-stack-boundary=2"
    fi
}


dnl See if GCC's -Wall is supported.
CheckWarnAll()
{
    AC_MSG_CHECKING(for GCC -Wall option)
    have_gcc_Wall=no

    save_CFLAGS="$CFLAGS"
    CFLAGS="$save_CFLAGS -Wall"
    AC_TRY_COMPILE([
    int x = 0;
    ],[
    ],[
    have_gcc_Wall=yes
    ])
    AC_MSG_RESULT($have_gcc_Wall)
    CFLAGS="$save_CFLAGS"

    if test x$have_gcc_Wall = xyes; then
        EXTRA_CFLAGS="$EXTRA_CFLAGS -Wall"

        dnl Haiku headers use multicharacter constants all over the place. Ignore these warnings when using -Wall.
        AC_MSG_CHECKING(for necessary GCC -Wno-multichar option)
        need_gcc_Wno_multichar=no
        case "$host" in
            *-*-beos* | *-*-haiku*)
                need_gcc_Wno_multichar=yes
                ;;
        esac
        AC_MSG_RESULT($need_gcc_Wno_multichar)
        if test x$need_gcc_Wno_multichar = xyes; then
            EXTRA_CFLAGS="$EXTRA_CFLAGS -Wno-multichar"
        fi
    fi
}


dnl Find the X11 include and library directories
CheckX11()
{


    AC_ARG_ENABLE(video-x11,
AC_HELP_STRING([--enable-video-x11], [use X11 video driver [[default=yes]]]),
                  , enable_video_x11=yes)
    if test x$enable_video = xyes -a x$enable_video_x11 = xyes; then
        case "$host" in
            *-*-darwin*)
                # This isn't necessary for X11, but fixes GLX detection
                if test "x$x_includes" = xNONE && \
                   test "x$x_libraries" = xNONE && \
                   test -d /usr/X11R6/include && \
                   test -d /usr/X11R6/lib; then
                    x_includes="/usr/X11R6/include"
                    x_libraries="/usr/X11R6/lib"
                fi
                ;;
        esac
        AC_PATH_X
        AC_PATH_XTRA
        if test x$have_x = xyes; then
            # Only allow dynamically loaded X11 if the X11 function pointers
            # will not end up in the global namespace, which causes problems
            # with other libraries calling X11 functions.
            x11_symbols_private=$have_gcc_fvisibility

            AC_ARG_ENABLE(x11-shared,
AC_HELP_STRING([--enable-x11-shared], [dynamically load X11 support [[default=maybe]]]),
                          , enable_x11_shared=maybe)

            case "$host" in
                *-*-darwin*)
                    x11_symbols_private=yes
                    x11_lib='/usr/X11R6/lib/libX11.6.dylib'
                    x11ext_lib='/usr/X11R6/lib/libXext.6.dylib'
                    xcursor_lib='/usr/X11R6/lib/libXcursor.1.dylib'
                    xinerama_lib='/usr/X11R6/lib/libXinerama.1.dylib'
                    xinput_lib='/usr/X11R6/lib/libXi.6.dylib'
                    xrandr_lib='/usr/X11R6/lib/libXrandr.2.dylib'
                    xrender_lib='/usr/X11R6/lib/libXrender.1.dylib'
                    xss_lib='/usr/X11R6/lib/libXss.1.dylib'
                    xvidmode_lib='/usr/X11R6/lib/libXxf86vm.1.dylib'
                    ;;
                *-*-openbsd*)
                    x11_lib='libX11.so'
                    x11ext_lib='libXext.so'
                    xcursor_lib='libXcursor.so'
                    xinerama_lib='libXinerama.so'
                    xinput_lib='libXi.so'
                    xrandr_lib='libXrandr.so'
                    xrender_lib='libXrender.so'
                    xss_lib='libXss.so'
                    xvidmode_lib='libXxf86vm.so'
                    ;;
                *)
                    x11_lib=[`find_lib "libX11.so.*" "$X_LIBS -L/usr/X11/$base_libdir -L/usr/X11R6/$base_libdir" | sed 's/.*\/\(.*\)/\1/; q'`]
                    x11ext_lib=[`find_lib "libXext.so.*" "$X_LIBS -L/usr/X11/$base_libdir -L/usr/X11R6/$base_libdir" | sed 's/.*\/\(.*\)/\1/; q'`]
                    xcursor_lib=[`find_lib "libXcursor.so.*" "$X_LIBS -L/usr/X11/$base_libdir -L/usr/X11R6/$base_libdir" | sed 's/.*\/\(.*\)/\1/; q'`]
                    xinerama_lib=[`find_lib "libXinerama.so.*" "$X_LIBS -L/usr/X11/$base_libdir -L/usr/X11R6/$base_libdir" | sed 's/.*\/\(.*\)/\1/; q'`]
                    xinput_lib=[`find_lib "libXi.so.*" "$X_LIBS -L/usr/X11/$base_libdir -L/usr/X11R6/$base_libdir" | sed 's/.*\/\(.*\)/\1/; q'`]
                    xrandr_lib=[`find_lib "libXrandr.so.*" "$X_LIBS -L/usr/X11/$base_libdir -L/usr/X11R6/$base_libdir" | sed 's/.*\/\(.*\)/\1/; q'`]
                    xrender_lib=[`find_lib "libXrender.so.*" "$X_LIBS -L/usr/X11/$base_libdir -L/usr/X11R6/$base_libdir" | sed 's/.*\/\(.*\)/\1/; q'`]
                    xss_lib=[`find_lib "libXss.so.*" "$X_LIBS -L/usr/X11/$base_libdir -L/usr/X11R6/$base_libdir" | sed 's/.*\/\(.*\)/\1/; q'`]
                    xvidmode_lib=[`find_lib "libXxf86vm.so.*" "$X_LIBS -L/usr/X11/$base_libdir -L/usr/X11R6/$base_libdir" | sed 's/.*\/\(.*\)/\1/; q'`]
                    ;;
            esac

            if test x$ac_cv_func_shmat != xyes; then
                X_CFLAGS="$X_CFLAGS -DNO_SHARED_MEMORY"
            fi
            CFLAGS="$CFLAGS $X_CFLAGS"
            LDFLAGS="$LDFLAGS $X_LIBS"

            AC_CHECK_HEADER(X11/extensions/Xext.h,
                            have_xext_h_hdr=yes,
                            have_xext_h_hdr=no,
                            [#include <X11/Xlib.h>
                             #include <X11/Xproto.h>
                            ])
            if test x$have_xext_h_hdr != xyes; then
               AC_MSG_ERROR([
*** Missing Xext.h, maybe you need to install the libxext-dev package?
               ])
            fi

            AC_DEFINE(SDL_VIDEO_DRIVER_X11, 1, [ ])
            SOURCES="$SOURCES $srcdir/src/video/x11/*.c"
            EXTRA_CFLAGS="$EXTRA_CFLAGS $X_CFLAGS"

            # Needed so SDL applications can include SDL_syswm.h
            SDL_CFLAGS="$SDL_CFLAGS $X_CFLAGS"

            if test x$enable_x11_shared = xmaybe; then
                enable_x11_shared=$x11_symbols_private
            fi
            if test x$have_loadso != xyes && \
               test x$enable_x11_shared = xyes; then
                AC_MSG_WARN([You must have SDL_LoadObject() support for dynamic X11 loading])
                enable_x11_shared=no
            fi
            if test x$x11_symbols_private != xyes && \
               test x$enable_x11_shared = xyes; then
                AC_MSG_WARN([You must have gcc4 (-fvisibility=hidden) for dynamic X11 loading])
                enable_x11_shared=no
            fi

            if test x$have_loadso = xyes && \
               test x$enable_x11_shared = xyes && test x$x11_lib != x && test x$x11ext_lib != x; then
                echo "-- dynamic libX11 -> $x11_lib"
                echo "-- dynamic libX11ext -> $x11ext_lib"
                AC_DEFINE_UNQUOTED(SDL_VIDEO_DRIVER_X11_DYNAMIC, "$x11_lib", [ ])
                AC_DEFINE_UNQUOTED(SDL_VIDEO_DRIVER_X11_DYNAMIC_XEXT, "$x11ext_lib", [ ])
            else
                enable_x11_shared=no
                EXTRA_LDFLAGS="$EXTRA_LDFLAGS $X_LIBS -lX11 -lXext"
            fi
            have_video=yes

            AC_MSG_CHECKING(for const parameter to XextAddDisplay)
            have_const_param_XextAddDisplay=no
            AC_TRY_COMPILE([
              #include <X11/Xlib.h>
              #include <X11/Xproto.h>
              #include <X11/extensions/Xext.h>
              #include <X11/extensions/extutil.h>
              extern XExtDisplayInfo* XextAddDisplay(XExtensionInfo* a,Display* b,_Xconst char* c,XExtensionHooks* d,int e,XPointer f);
            ],[
            ],[
            have_const_param_XextAddDisplay=yes
            AC_DEFINE(SDL_VIDEO_DRIVER_X11_CONST_PARAM_XEXTADDDISPLAY)
            ])
            AC_MSG_RESULT($have_const_param_XextAddDisplay)

            AC_MSG_CHECKING(for const parameter to _XData32)
	    have_const_param_xdata32=no
	    AC_TRY_COMPILE([
	      #include <X11/Xlibint.h>
	      extern int _XData32(Display *dpy,register _Xconst long *data,unsigned len);
	    ],[
	    ],[
	    have_const_param_xdata32=yes
	    AC_DEFINE(SDL_VIDEO_DRIVER_X11_CONST_PARAM_XDATA32)
	    ])
	    AC_MSG_RESULT($have_const_param_xdata32)

            dnl AC_CHECK_LIB(X11, XGetEventData, AC_DEFINE(SDL_VIDEO_DRIVER_X11_SUPPORTS_GENERIC_EVENTS, 1, [Have XGenericEvent]))
            AC_MSG_CHECKING([for XGenericEvent])
            have_XGenericEvent=no
            AC_TRY_COMPILE([
              	#include <X11/Xlib.h>
            ],[
Display *display;
XEvent event;
XGenericEventCookie *cookie = &event.xcookie;
XNextEvent(display, &event);
XGetEventData(display, cookie);
XFreeEventData(display, cookie);
            ],[
                have_XGenericEvent=yes
                AC_DEFINE(SDL_VIDEO_DRIVER_X11_SUPPORTS_GENERIC_EVENTS)
            ])
            AC_MSG_RESULT($have_XGenericEvent)

            AC_CHECK_LIB(X11, XkbKeycodeToKeysym, AC_DEFINE(SDL_VIDEO_DRIVER_X11_HAS_XKBKEYCODETOKEYSYM, 1, [Have XkbKeycodeToKeysym]))

            AC_ARG_ENABLE(video-x11-xcursor,
AC_HELP_STRING([--enable-video-x11-xcursor], [enable X11 Xcursor support [[default=yes]]]),
                            , enable_video_x11_xcursor=yes)
            if test x$enable_video_x11_xcursor = xyes; then
                definitely_enable_video_x11_xcursor=no
                AC_CHECK_HEADER(X11/Xcursor/Xcursor.h,
                                have_xcursor_h_hdr=yes,
                                have_xcursor_h_hdr=no,
                                [#include <X11/Xlib.h>
                                ])
                if test x$have_xcursor_h_hdr = xyes; then
                    if test x$enable_x11_shared = xyes && test x$xcursor_lib != x ; then
                        echo "-- dynamic libXcursor -> $xcursor_lib"
                        AC_DEFINE_UNQUOTED(SDL_VIDEO_DRIVER_X11_DYNAMIC_XCURSOR, "$xcursor_lib", [ ])
                        definitely_enable_video_x11_xcursor=yes
                    else
                        AC_CHECK_LIB(Xcursor, XcursorImageCreate, have_xcursor_lib=yes)
                        if test x$have_xcursor_lib = xyes ; then
                            EXTRA_LDFLAGS="$EXTRA_LDFLAGS -lXcursor"
                            definitely_enable_video_x11_xcursor=yes
                        fi
                    fi
                fi
            fi
            if test x$definitely_enable_video_x11_xcursor = xyes; then
                AC_DEFINE(SDL_VIDEO_DRIVER_X11_XCURSOR, 1, [ ])
            fi
            AC_ARG_ENABLE(video-x11-xinerama,
AC_HELP_STRING([--enable-video-x11-xinerama], [enable X11 Xinerama support [[default=yes]]]),
                            , enable_video_x11_xinerama=yes)
            if test x$enable_video_x11_xinerama = xyes; then
                definitely_enable_video_x11_xinerama=no
                AC_CHECK_HEADER(X11/extensions/Xinerama.h,
                                have_xinerama_h_hdr=yes,
                                have_xinerama_h_hdr=no,
                                [#include <X11/Xlib.h>
                                ])
                if test x$have_xinerama_h_hdr = xyes; then
                    if test x$enable_x11_shared = xyes && test x$xinerama_lib != x ; then
                        echo "-- dynamic libXinerama -> $xinerama_lib"
                        AC_DEFINE_UNQUOTED(SDL_VIDEO_DRIVER_X11_DYNAMIC_XINERAMA, "$xinerama_lib", [ ])
                        definitely_enable_video_x11_xinerama=yes
                    else
                        AC_CHECK_LIB(Xinerama, XineramaQueryExtension, have_xinerama_lib=yes)
                        if test x$have_xinerama_lib = xyes ; then
                            EXTRA_LDFLAGS="$EXTRA_LDFLAGS -lXinerama"
                            definitely_enable_video_x11_xinerama=yes
                        fi
                    fi
                fi
            fi
            if test x$definitely_enable_video_x11_xinerama = xyes; then
                AC_DEFINE(SDL_VIDEO_DRIVER_X11_XINERAMA, 1, [ ])
            fi
            AC_ARG_ENABLE(video-x11-xinput,
AC_HELP_STRING([--enable-video-x11-xinput], [enable X11 XInput extension for manymouse, tablets, etc [[default=yes]]]),
                            , enable_video_x11_xinput=yes)
            if test x$enable_video_x11_xinput = xyes; then
                definitely_enable_video_x11_xinput=no
                AC_CHECK_HEADER(X11/extensions/XInput2.h,
                                have_xinput_h_hdr=yes,
                                have_xinput_h_hdr=no,
                                [#include <X11/Xlib.h>
                                ])
                if test x$have_xinput_h_hdr = xyes; then
                    if test x$enable_x11_shared = xyes && test x$xinput_lib != x ; then
                        echo "-- dynamic libXi -> $xinput_lib"
                        AC_DEFINE_UNQUOTED(SDL_VIDEO_DRIVER_X11_DYNAMIC_XINPUT2, "$xinput_lib", [ ])
                        definitely_enable_video_x11_xinput=yes
                    else
                        AC_CHECK_LIB(Xi, XOpenDevice, have_xinput_lib=yes)
                        if test x$have_xinput_lib = xyes ; then
                            EXTRA_LDFLAGS="$EXTRA_LDFLAGS -lXi"
                            definitely_enable_video_x11_xinput=yes
                        fi
                    fi
                fi
            fi
            if test x$definitely_enable_video_x11_xinput = xyes; then
                AC_DEFINE(SDL_VIDEO_DRIVER_X11_XINPUT2, 1, [ ])
                AC_MSG_CHECKING(for xinput2 multitouch)
            	have_xinput2_multitouch=no
            	AC_TRY_COMPILE([
              		#include <X11/Xlib.h>
             		#include <X11/Xproto.h>
			#include <X11/extensions/XInput2.h>
            	],[
int event_type = XI_TouchBegin;
XITouchClassInfo *t;
Status 
XIAllowTouchEvents(Display *a,int b,unsigned int c,Window d,int f)
{
    return (Status)0;
}
            	],[
            	have_xinput2_multitouch=yes
            	AC_DEFINE(SDL_VIDEO_DRIVER_X11_XINPUT2_SUPPORTS_MULTITOUCH)
            	])
            	AC_MSG_RESULT($have_xinput2_multitouch)
            fi
            AC_ARG_ENABLE(video-x11-xrandr,
AC_HELP_STRING([--enable-video-x11-xrandr], [enable X11 Xrandr extension for fullscreen [[default=yes]]]),
                            , enable_video_x11_xrandr=yes)
            if test x$enable_video_x11_xrandr = xyes; then
                definitely_enable_video_x11_xrandr=no
                AC_CHECK_HEADER(X11/extensions/Xrandr.h,
                                have_xrandr_h_hdr=yes,
                                have_xrandr_h_hdr=no,
                                [#include <X11/Xlib.h>
                                ])
                if test x$have_xrandr_h_hdr = xyes; then
                    if test x$enable_x11_shared = xyes && test x$xrandr_lib != x ; then
                        echo "-- dynamic libXrandr -> $xrandr_lib"
                        AC_DEFINE_UNQUOTED(SDL_VIDEO_DRIVER_X11_DYNAMIC_XRANDR, "$xrandr_lib", [ ])
                        definitely_enable_video_x11_xrandr=yes
                    else
                        AC_CHECK_LIB(Xrandr, XRRQueryExtension, have_xrandr_lib=yes)
                        if test x$have_xrandr_lib = xyes ; then
                            EXTRA_LDFLAGS="$EXTRA_LDFLAGS -lXrandr"
                            definitely_enable_video_x11_xrandr=yes
                        fi
                    fi
                fi
            fi
            if test x$definitely_enable_video_x11_xrandr = xyes; then
                AC_DEFINE(SDL_VIDEO_DRIVER_X11_XRANDR, 1, [ ])
            fi
            AC_ARG_ENABLE(video-x11-scrnsaver,
AC_HELP_STRING([--enable-video-x11-scrnsaver], [enable X11 screensaver extension [[default=yes]]]),
                            , enable_video_x11_scrnsaver=yes)
            if test x$enable_video_x11_scrnsaver = xyes; then
                AC_CHECK_HEADER(X11/extensions/scrnsaver.h,
                                have_scrnsaver_h_hdr=yes,
                                have_scrnsaver_h_hdr=no,
                                [#include <X11/Xlib.h>
                                ])
                if test x$have_scrnsaver_h_hdr = xyes; then
                    if test x$enable_x11_shared = xyes && test x$xss_lib != x ; then
                        echo "-- dynamic libXss -> $xss_lib"
                        AC_DEFINE_UNQUOTED(SDL_VIDEO_DRIVER_X11_DYNAMIC_XSS, "$xss_lib", [ ])
                        definitely_enable_video_x11_scrnsaver=yes
                    else
                        AC_CHECK_LIB(Xss, XScreenSaverSuspend, have_xss_lib=yes)
                        if test x$have_xss_lib = xyes ; then
                            EXTRA_LDFLAGS="$EXTRA_LDFLAGS -lXss"
                            definitely_enable_video_x11_scrnsaver=yes
                        fi
                    fi
                fi
            fi
            if test x$definitely_enable_video_x11_scrnsaver = xyes; then
                AC_DEFINE(SDL_VIDEO_DRIVER_X11_XSCRNSAVER, 1, [ ])
            fi
            AC_ARG_ENABLE(video-x11-xshape,
AC_HELP_STRING([--enable-video-x11-xshape], [enable X11 XShape support [[default=yes]]]),
                            , enable_video_x11_xshape=yes)
            if test x$enable_video_x11_xshape = xyes; then
                AC_CHECK_HEADER(X11/extensions/shape.h,
                                have_shape_h_hdr=yes,
                                have_shape_h_hdr=no,
                                [#include <X11/Xlib.h>
                                ])
                if test x$have_shape_h_hdr = xyes; then
                    AC_DEFINE(SDL_VIDEO_DRIVER_X11_XSHAPE, 1, [ ])
                fi
            fi
            AC_ARG_ENABLE(video-x11-vm,
AC_HELP_STRING([--enable-video-x11-vm], [use X11 VM extension for fullscreen [[default=yes]]]),
                            , enable_video_x11_vm=yes)
            if test x$enable_video_x11_vm = xyes; then
                definitely_enable_video_x11_vm=no
                AC_CHECK_HEADER(X11/extensions/xf86vmode.h,
                                have_vm_h_hdr=yes,
                                have_vm_h_hdr=no,
                                [#include <X11/Xlib.h>
                                ])
                if test x$have_vm_h_hdr = xyes; then
                    if test x$enable_x11_shared = xyes && test x$xvidmode_lib != x ; then
                        echo "-- dynamic libXxf86vm -> $xvidmode_lib"
                        AC_DEFINE_UNQUOTED(SDL_VIDEO_DRIVER_X11_DYNAMIC_XVIDMODE, "$xvidmode_lib", [ ])
                        definitely_enable_video_x11_vm=yes
                    else
                        AC_CHECK_LIB(Xxf86vm, XF86VidModeQueryVersion, have_vm_lib=yes)
                        if test x$have_vm_lib = xyes ; then
                            EXTRA_LDFLAGS="$EXTRA_LDFLAGS -lXxf86vm"
                            definitely_enable_video_x11_vm=yes
                        fi
                    fi
                fi
            fi
            if test x$definitely_enable_video_x11_vm = xyes; then
                AC_DEFINE(SDL_VIDEO_DRIVER_X11_XVIDMODE, 1, [ ])
            fi
        fi
    fi
}

dnl Set up the BWindow video driver if enabled
CheckBWINDOW()
{
    if test x$enable_video = xyes; then
        AC_DEFINE(SDL_VIDEO_DRIVER_BWINDOW, 1, [ ])
        SOURCES="$SOURCES $srcdir/src/video/bwindow/*.cc"
        have_video=yes
    fi
}

dnl Set up the Cocoa video driver for Mac OS X (but not Darwin)
CheckCOCOA()
{
    AC_ARG_ENABLE(video-cocoa,
AC_HELP_STRING([--enable-video-cocoa], [use Cocoa video driver [[default=yes]]]),
                  , enable_video_cocoa=yes)
    if test x$enable_video = xyes -a x$enable_video_cocoa = xyes; then
        save_CFLAGS="$CFLAGS"
        dnl work around that we don't have Objective-C support in autoconf
        CFLAGS="$CFLAGS -x objective-c"
        AC_MSG_CHECKING(for Cocoa framework)
        have_cocoa=no
        AC_TRY_COMPILE([
          #import <Cocoa/Cocoa.h>
        ],[
        ],[
        have_cocoa=yes
        ])
        AC_MSG_RESULT($have_cocoa)
        CFLAGS="$save_CFLAGS"
        if test x$have_cocoa = xyes; then
            AC_DEFINE(SDL_VIDEO_DRIVER_COCOA, 1, [ ])
            SOURCES="$SOURCES $srcdir/src/video/cocoa/*.m"
            have_video=yes
        fi
    fi
}

dnl Find DirectFB
CheckDirectFB()
{
    AC_ARG_ENABLE(video-directfb,
AC_HELP_STRING([--enable-video-directfb], [use DirectFB video driver [[default=no]]]),
                  , enable_video_directfb=no)
    if test x$enable_video = xyes -a x$enable_video_directfb = xyes; then
        video_directfb=no

        DIRECTFB_REQUIRED_VERSION=1.0.0
        AC_PATH_PROGS(DIRECTFBCONFIG, directfb-config, no, [$prefix/bin:$PATH])
        if test x$DIRECTFBCONFIG = xno; then
            AC_PATH_PROG(PKG_CONFIG, pkg-config, no)
            if test x$PKG_CONFIG != xno; then
                if $PKG_CONFIG --atleast-pkgconfig-version 0.7 && $PKG_CONFIG --atleast-version $DIRECTFB_REQUIRED_VERSION directfb; then
                    DIRECTFB_CFLAGS=`$PKG_CONFIG --cflags directfb`
                    DIRECTFB_LIBS=`$PKG_CONFIG --libs directfb`
                    DIRECTFB_PREFIX=`$PKG_CONFIG --variable=prefix directfb`
                    video_directfb=yes
                fi
            fi
        else
            set -- `echo $DIRECTFB_REQUIRED_VERSION | sed 's/\./ /g'`
            NEED_VERSION=`expr $1 \* 10000 + $2 \* 100 + $3`
            set -- `$DIRECTFBCONFIG --version | sed 's/\./ /g'`
            HAVE_VERSION=`expr $1 \* 10000 + $2 \* 100 + $3`
            if test $HAVE_VERSION -ge $NEED_VERSION; then
                DIRECTFB_CFLAGS=`$DIRECTFBCONFIG --cflags`
                DIRECTFB_LIBS=`$DIRECTFBCONFIG --libs`
                DIRECTFB_PREFIX=`$DIRECTFBCONFIG --prefix`
                video_directfb=yes
            fi
        fi
        if test x$video_directfb = xyes; then
            # SuSE 11.1 installs directfb-config without directfb-devel
            save_CPPFLAGS="$CPPFLAGS"
            CPPFLAGS="$CPPFLAGS $DIRECTFB_CFLAGS"
            AC_CHECK_HEADER(directfb.h, have_directfb_hdr=yes, have_directfb_hdr=no)
            CPPFLAGS="$save_CPPFLAGS"
            video_directfb=$have_directfb_hdr
        fi
        AC_MSG_CHECKING(for DirectFB $DIRECTFB_REQUIRED_VERSION support)
        AC_MSG_RESULT($video_directfb)

        if test x$video_directfb = xyes; then
            AC_ARG_ENABLE(directfb-shared,
AC_HELP_STRING([--enable-directfb-shared], [dynamically load directfb support [[default=yes]]]),
                              , enable_directfb_shared=yes)

            AC_DEFINE(SDL_VIDEO_DRIVER_DIRECTFB, 1, [ ])
            AC_DEFINE(SDL_VIDEO_RENDER_DIRECTFB, 1, [ ])
            SOURCES="$SOURCES $srcdir/src/video/directfb/*.c"
            EXTRA_CFLAGS="$EXTRA_CFLAGS $DIRECTFB_CFLAGS"

            AC_MSG_CHECKING(for directfb dynamic loading support)
            directfb_shared=no
            directfb_lib=[`find_lib "libdirectfb.so.*" "$DIRECTFB_LIBS"`]
            # | sed 's/.*\/\(.*\)/\1/; q'`]
AC_MSG_WARN("directfb $directfb_lib")
            if test x$have_loadso != xyes && \
               test x$enable_directfb_shared = xyes; then
                AC_MSG_WARN([You must have SDL_LoadObject() support for dynamic directfb loading])
            fi
            if test x$have_loadso = xyes && \
               test x$enable_directfb_shared = xyes && test x$directfb_lib != x; then
                directfb_shared=yes
                echo "-- $directfb_lib_spec -> $directfb_lib"
                AC_DEFINE_UNQUOTED(SDL_VIDEO_DRIVER_DIRECTFB_DYNAMIC, "$directfb_lib", [ ])
            else
                EXTRA_LDFLAGS="$EXTRA_LDFLAGS $DIRECTFB_LIBS"
            fi
            AC_MSG_RESULT($directfb_shared)
            have_video=yes
        fi
    fi
}

dnl Find FusionSound
CheckFusionSound()
{
    AC_ARG_ENABLE(fusionsound,
AC_HELP_STRING([--enable-fusionsound], [use FusionSound audio driver [[default=no]]]),
                  , enable_fusionsound=no)
    if test x$enable_audio = xyes -a x$enable_fusionsound = xyes; then
        fusionsound=no

        FUSIONSOUND_REQUIRED_VERSION=1.1.1

        AC_PATH_PROG(PKG_CONFIG, pkg-config, no)
        AC_MSG_CHECKING(for FusionSound $FUSIONSOUND_REQUIRED_VERSION support)
        if test x$PKG_CONFIG != xno; then
            if $PKG_CONFIG --atleast-pkgconfig-version 0.7 && $PKG_CONFIG --atleast-version $FUSIONSOUND_REQUIRED_VERSION fusionsound; then
                FUSIONSOUND_CFLAGS=`$PKG_CONFIG --cflags fusionsound`
                FUSIONSOUND_LIBS=`$PKG_CONFIG --libs fusionsound`
                fusionsound=yes
            fi
        fi
        AC_MSG_RESULT($fusionsound)

        if test x$fusionsound = xyes; then
            AC_DEFINE(SDL_AUDIO_DRIVER_FUSIONSOUND, 1, [ ])
            SOURCES="$SOURCES $srcdir/src/audio/fusionsound/*.c"
            EXTRA_CFLAGS="$EXTRA_CFLAGS $FUSIONSOUND_CFLAGS"
            
            AC_ARG_ENABLE(fusionsound-shared,
AC_HELP_STRING([--enable-fusionsound-shared], [dynamically load fusionsound audio support [[default=yes]]]),
                          , enable_fusionsound_shared=yes)
            fusionsound_shared=no
            AC_MSG_CHECKING(for FusionSound dynamic loading support)
            if test x$have_loadso != xyes && \
               test x$enable_fusionsound_shared = xyes; then
                AC_MSG_WARN([You must have SDL_LoadObject() support for dynamic fusionsound loading])
            fi
            if test x$have_loadso = xyes && \
               test x$enable_fusionsound_shared = xyes; then
                AC_DEFINE_UNQUOTED(SDL_AUDIO_DRIVER_FUSIONSOUND_DYNAMIC, "libfusionsound.so", [ ])
                fusionsound_shared=yes
            else
                EXTRA_LDFLAGS="$EXTRA_LDFLAGS $FUSIONSOUND_LIBS"
            fi
            AC_MSG_RESULT($fusionsound_shared)
            
            have_audio=yes
        fi
    fi
}

dnl rcg04172001 Set up the Null video driver.
CheckDummyVideo()
{
    AC_ARG_ENABLE(video-dummy,
AC_HELP_STRING([--enable-video-dummy], [use dummy video driver [[default=yes]]]),
                  , enable_video_dummy=yes)
    if test x$enable_video_dummy = xyes; then
        AC_DEFINE(SDL_VIDEO_DRIVER_DUMMY, 1, [ ])
        SOURCES="$SOURCES $srcdir/src/video/dummy/*.c"
        have_video=yes
    fi
}

dnl Check to see if OpenGL support is desired
AC_ARG_ENABLE(video-opengl,
AC_HELP_STRING([--enable-video-opengl], [include OpenGL support [[default=yes]]]),
              , enable_video_opengl=yes)

dnl Find OpenGL
CheckOpenGLX11()
{
    if test x$enable_video = xyes -a x$enable_video_opengl = xyes; then
        AC_MSG_CHECKING(for OpenGL (GLX) support)
        video_opengl=no
        AC_TRY_COMPILE([
         #include <GL/gl.h>
         #include <GL/glx.h>
        ],[
        ],[
        video_opengl=yes
        ])
        AC_MSG_RESULT($video_opengl)
        if test x$video_opengl = xyes; then
            AC_DEFINE(SDL_VIDEO_OPENGL, 1, [ ])
            AC_DEFINE(SDL_VIDEO_OPENGL_GLX, 1, [ ])
            AC_DEFINE(SDL_VIDEO_RENDER_OGL, 1, [ ])
        fi
    fi
}

dnl Check to see if OpenGL ES support is desired
AC_ARG_ENABLE(video-opengles,
AC_HELP_STRING([--enable-video-opengles], [include OpenGL ES support [[default=yes]]]),
              , enable_video_opengles=yes)

dnl Find OpenGL ES
CheckOpenGLESX11()
{
    if test x$enable_video = xyes -a x$enable_video_opengles = xyes; then
        AC_MSG_CHECKING(for OpenGL ES (EGL) support)
        video_opengles=no
        AC_TRY_COMPILE([
         #include <EGL/egl.h>
        ],[
        ],[
        video_opengles=yes
        ])
        AC_MSG_RESULT($video_opengles)
        if test x$video_opengles = xyes; then
            AC_MSG_CHECKING(for OpenGL ES v1 headers)
            video_opengles_v1=no
            AC_TRY_COMPILE([
             #include <GLES/gl.h>
             #include <GLES/glext.h>
            ],[
            ],[
            video_opengles_v1=yes
            ])
            AC_MSG_RESULT($video_opengles_v1)
            if test x$video_opengles_v1 = xyes; then
                AC_DEFINE(SDL_VIDEO_OPENGL_ES, 1, [ ])
                AC_DEFINE(SDL_VIDEO_RENDER_OGL_ES, 1, [ ])
            fi
            AC_MSG_CHECKING(for OpenGL ES v2 headers)
            video_opengles_v2=no
            AC_TRY_COMPILE([
             #include <GLES2/gl2.h>
             #include <GLES2/gl2ext.h>
            ],[
            ],[
            video_opengles_v2=yes
            ])
            AC_MSG_RESULT($video_opengles_v2)
            if test x$video_opengles_v2 = xyes; then
                AC_DEFINE(SDL_VIDEO_OPENGL_ES2, 1, [ ])
                AC_DEFINE(SDL_VIDEO_RENDER_OGL_ES2, 1, [ ])
            fi
        fi
    fi
}

dnl Check for Windows OpenGL
CheckWINDOWSGL()
{
    if test x$enable_video = xyes -a x$enable_video_opengl = xyes; then
        AC_DEFINE(SDL_VIDEO_OPENGL, 1, [ ])
        AC_DEFINE(SDL_VIDEO_OPENGL_WGL, 1, [ ])
        AC_DEFINE(SDL_VIDEO_RENDER_OGL, 1, [ ])
    fi
}

dnl Check for BeOS OpenGL
CheckBeGL()
{
    if test x$enable_video = xyes -a x$enable_video_opengl = xyes; then
        AC_DEFINE(SDL_VIDEO_OPENGL, 1, [ ])
        AC_DEFINE(SDL_VIDEO_OPENGL_BGL, 1, [ ])
        AC_DEFINE(SDL_VIDEO_RENDER_OGL, 1, [ ])
        EXTRA_LDFLAGS="$EXTRA_LDFLAGS -lGL"
    fi
}

dnl Check for MacOS OpenGL
CheckMacGL()
{
    if test x$enable_video = xyes -a x$enable_video_opengl = xyes; then
        AC_DEFINE(SDL_VIDEO_OPENGL, 1, [ ])
        AC_DEFINE(SDL_VIDEO_OPENGL_CGL, 1, [ ])
        AC_DEFINE(SDL_VIDEO_RENDER_OGL, 1, [ ])
        case "$host" in
            *-*-darwin*)
                if test x$enable_video_cocoa = xyes; then
                    EXTRA_LDFLAGS="$EXTRA_LDFLAGS -Wl,-framework,OpenGL"
                fi
        esac
    fi
}

dnl See if we can use the new unified event interface in Linux 2.4
CheckInputEvents()
{
    dnl Check for Linux 2.4 unified input event interface support
        AC_MSG_CHECKING(for Linux 2.4 unified input interface)
        use_input_events=no
        AC_TRY_COMPILE([
          #include <linux/input.h>
        ],[
          #ifndef EVIOCGNAME
          #error EVIOCGNAME() ioctl not available
          #endif
        ],[
        use_input_events=yes
        ])
        AC_MSG_RESULT($use_input_events)
        if test x$use_input_events = xyes; then
            AC_DEFINE(SDL_INPUT_LINUXEV, 1, [ ])
        fi
}

dnl See if the platform offers libudev for device enumeration and hotplugging.
CheckLibUDev()
{
    AC_ARG_ENABLE(libudev,
AC_HELP_STRING([--enable-libudev], [enable libudev support [[default=yes]]]),
                        , enable_libudev=yes)
    if test x$enable_libudev = xyes; then
        AC_CHECK_HEADER(libudev.h,
                        have_libudev_h_hdr=yes,
                        have_libudev_h_hdr=no)
        if test x$have_libudev_h_hdr = xyes; then
            AC_DEFINE(HAVE_LIBUDEV_H, 1, [ ])
        fi
    fi
}

dnl See if the platform offers libdbus for various IPC techniques.
CheckDBus()
{
    AC_ARG_ENABLE(dbus,
AC_HELP_STRING([--enable-dbus], [enable D-Bus support [[default=yes]]]),
                        , enable_dbus=yes)
    if test x$enable_dbus = xyes; then
        AC_PATH_PROG(PKG_CONFIG, pkg-config, no)
        if test x$PKG_CONFIG != xno; then
            DBUS_CFLAGS=`$PKG_CONFIG --cflags dbus-1`
            save_CFLAGS="$CFLAGS"
            CFLAGS="$save_CFLAGS $DBUS_CFLAGS"
            AC_CHECK_HEADER(dbus/dbus.h,
                            have_dbus_dbus_h_hdr=yes,
                            have_dbus_dbus_h_hdr=no)
            CFLAGS="$save_CFLAGS"
            if test x$have_dbus_dbus_h_hdr = xyes; then
                AC_DEFINE(HAVE_DBUS_DBUS_H, 1, [ ])
                EXTRA_CFLAGS="$EXTRA_CFLAGS $DBUS_CFLAGS"
            fi
        fi
    fi
}

dnl See if we can use the Touchscreen input library
CheckTslib()
{
    AC_ARG_ENABLE(input-tslib,
AC_HELP_STRING([--enable-input-tslib], [use the Touchscreen library for input [[default=yes]]]),
                  , enable_input_tslib=yes)
    if test x$enable_input_tslib = xyes; then
        AC_MSG_CHECKING(for Touchscreen library support)
        enable_input_tslib=no
        AC_TRY_COMPILE([
          #include "tslib.h"
        ],[
        ],[
        enable_input_tslib=yes
        ])
        AC_MSG_RESULT($enable_input_tslib)
        if test x$enable_input_tslib = xyes; then
            AC_DEFINE(SDL_INPUT_TSLIB, 1, [ ])
            EXTRA_LDFLAGS="$EXTRA_LDFLAGS -lts"
        fi
    fi
}

dnl See what type of thread model to use on Linux and Solaris
CheckPTHREAD()
{
    dnl Check for pthread support
    AC_ARG_ENABLE(pthreads,
AC_HELP_STRING([--enable-pthreads], [use POSIX threads for multi-threading [[default=yes]]]),
                  , enable_pthreads=yes)
    dnl This is used on Linux for glibc binary compatibility (Doh!)
    AC_ARG_ENABLE(pthread-sem,
AC_HELP_STRING([--enable-pthread-sem], [use pthread semaphores [[default=yes]]]),
                  , enable_pthread_sem=yes)
    case "$host" in
        *-*-linux*|*-*-uclinux*)
            pthread_cflags="-D_REENTRANT"
            pthread_lib="-lpthread"
            ;;
        *-*-bsdi*)
            pthread_cflags="-D_REENTRANT -D_THREAD_SAFE"
            pthread_lib=""
            ;;
        *-*-darwin*)
            pthread_cflags="-D_THREAD_SAFE"
# causes Carbon.p complaints?
#            pthread_cflags="-D_REENTRANT -D_THREAD_SAFE"
            ;;
        *-*-freebsd*|*-*-dragonfly*)
            pthread_cflags="-D_REENTRANT -D_THREAD_SAFE"
            pthread_lib="-pthread"
            ;;
        *-*-netbsd*)
            pthread_cflags="-D_REENTRANT -D_THREAD_SAFE"
            pthread_lib="-lpthread"
            ;;
        *-*-openbsd*)
            pthread_cflags="-D_REENTRANT"
            pthread_lib="-pthread"
            ;;
        *-*-solaris2.9)
            # From Solaris 9+, posix4's preferred name is rt.
            pthread_cflags="-D_REENTRANT"
            pthread_lib="-lpthread -lrt"
            ;;
        *-*-solaris2.10)
            # Solaris 10+ merged pthread into libc.
            pthread_cflags="-D_REENTRANT"
            pthread_lib="-lrt"
            ;;
        *-*-solaris*)
            # Solaris 11+ merged rt into libc.
            pthread_cflags="-D_REENTRANT"
            pthread_lib=""
            ;;
        *-*-sysv5*)
            pthread_cflags="-D_REENTRANT -Kthread"
            pthread_lib=""
            ;;
        *-*-aix*)
            pthread_cflags="-D_REENTRANT -mthreads"
            pthread_lib="-lpthread"
            ;;
        *-*-hpux11*)
            pthread_cflags="-D_REENTRANT"
            pthread_lib="-L/usr/lib -lpthread"
            ;;
        *)
            pthread_cflags="-D_REENTRANT"
            pthread_lib="-lpthread"
            ;;
    esac
    if test x$enable_threads = xyes -a x$enable_pthreads = xyes; then
        # Save the original compiler flags and libraries
        ac_save_cflags="$CFLAGS"; ac_save_libs="$LIBS"
        # Add the pthread compiler flags and libraries
        CFLAGS="$CFLAGS $pthread_cflags"; LIBS="$LIBS $pthread_lib"
        # Check to see if we have pthread support on this system
        AC_MSG_CHECKING(for pthreads)
        use_pthreads=no
        AC_TRY_LINK([
         #include <pthread.h>
        ],[
         pthread_attr_t type;
         pthread_attr_init(&type);
        ],[
        use_pthreads=yes
        ])
        AC_MSG_RESULT($use_pthreads)
        # Restore the compiler flags and libraries
        CFLAGS="$ac_save_cflags"; LIBS="$ac_save_libs"

        # Do futher testing if we have pthread support...
        if test x$use_pthreads = xyes; then
            AC_DEFINE(SDL_THREAD_PTHREAD, 1, [ ])
            EXTRA_CFLAGS="$EXTRA_CFLAGS $pthread_cflags"
            EXTRA_LDFLAGS="$EXTRA_LDFLAGS $pthread_lib"
            SDL_CFLAGS="$SDL_CFLAGS $pthread_cflags"
            SDL_LIBS="$SDL_LIBS $pthread_lib"

            # Save the original compiler flags and libraries
            ac_save_cflags="$CFLAGS"; ac_save_libs="$LIBS"
            # Add the pthread compiler flags and libraries
            CFLAGS="$CFLAGS $pthread_cflags"; LIBS="$LIBS $pthread_lib"

            # Check to see if recursive mutexes are available
            AC_MSG_CHECKING(for recursive mutexes)
            has_recursive_mutexes=no
            if test x$has_recursive_mutexes = xno; then
                AC_TRY_COMPILE([
                  #include <pthread.h>
                ],[
                  pthread_mutexattr_t attr;
                  pthread_mutexattr_settype(&attr, PTHREAD_MUTEX_RECURSIVE);
                ],[
                has_recursive_mutexes=yes
                AC_DEFINE(SDL_THREAD_PTHREAD_RECURSIVE_MUTEX, 1, [ ])
                ])
            fi
            if test x$has_recursive_mutexes = xno; then
                AC_TRY_COMPILE([
                  #include <pthread.h>
                ],[
                  pthread_mutexattr_t attr;
                  pthread_mutexattr_setkind_np(&attr, PTHREAD_MUTEX_RECURSIVE_NP);
                ],[
                has_recursive_mutexes=yes
                AC_DEFINE(SDL_THREAD_PTHREAD_RECURSIVE_MUTEX_NP, 1, [ ])
                ])
            fi
            AC_MSG_RESULT($has_recursive_mutexes)

            # Check to see if pthread semaphore support is missing
            if test x$enable_pthread_sem = xyes; then
                AC_MSG_CHECKING(for pthread semaphores)
                have_pthread_sem=no
                AC_TRY_COMPILE([
                  #include <pthread.h>
                  #include <semaphore.h>
                ],[
                ],[
                have_pthread_sem=yes
                ])
                AC_MSG_RESULT($have_pthread_sem)
            fi
            if test x$have_pthread_sem = xyes; then
                AC_MSG_CHECKING(for sem_timedwait)
                have_sem_timedwait=no
                AC_TRY_LINK([
                  #include <pthread.h>
                  #include <semaphore.h>
                ],[
                  sem_timedwait(NULL, NULL);
                ],[
                have_sem_timedwait=yes
                AC_DEFINE(HAVE_SEM_TIMEDWAIT)
                ])
                AC_MSG_RESULT($have_sem_timedwait)
            fi

            AC_MSG_CHECKING(for pthread_spin_trylock)
            AC_TRY_LINK_FUNC(pthread_spin_trylock, [
              has_pthread_spin_trylock=yes
              AC_DEFINE(HAVE_PTHREAD_SPINLOCK, 1, [ ])
            ],[
              has_pthread_spin_trylock=no
            ])
            AC_MSG_RESULT($has_pthread_spin_trylock)

            AC_CHECK_HEADER(pthread_np.h, have_pthread_np_h=yes, have_pthread_np_h=no, [ #include <pthread.h> ])
            if test x$have_pthread_np_h = xyes; then
                AC_DEFINE(HAVE_PTHREAD_NP_H, 1, [ ])
            fi

            # Check to see if pthread naming is available
            AC_MSG_CHECKING(for pthread_setname_np)
            AC_TRY_LINK_FUNC(pthread_setname_np, [
              has_pthread_setname_np=yes
              AC_DEFINE(HAVE_PTHREAD_SETNAME_NP, 1, [ ])
            ],[
              has_pthread_setname_np=no
            ])
            AC_MSG_RESULT($has_pthread_setname_np)

            AC_MSG_CHECKING(for pthread_set_name_np)
            AC_TRY_LINK_FUNC(pthread_set_name_np, [
              has_pthread_set_name_np=yes
              AC_DEFINE(HAVE_PTHREAD_SET_NAME_NP, 1, [ ])
            ],[
              has_pthread_set_name_np=no
            ])
            AC_MSG_RESULT($has_pthread_set_name_np)

            # Restore the compiler flags and libraries
            CFLAGS="$ac_save_cflags"; LIBS="$ac_save_libs"

            # Basic thread creation functions
            SOURCES="$SOURCES $srcdir/src/thread/pthread/SDL_systhread.c"

            # Semaphores
            # We can fake these with mutexes and condition variables if necessary
            if test x$have_pthread_sem = xyes; then
                SOURCES="$SOURCES $srcdir/src/thread/pthread/SDL_syssem.c"
            else
                SOURCES="$SOURCES $srcdir/src/thread/generic/SDL_syssem.c"
            fi

            # Mutexes
            # We can fake these with semaphores if necessary
            SOURCES="$SOURCES $srcdir/src/thread/pthread/SDL_sysmutex.c"

            # Condition variables
            # We can fake these with semaphores and mutexes if necessary
            SOURCES="$SOURCES $srcdir/src/thread/pthread/SDL_syscond.c"

            # Thread local storage
            SOURCES="$SOURCES $srcdir/src/thread/pthread/SDL_systls.c"

            have_threads=yes
        fi
    fi
}

dnl Determine whether the compiler can produce Windows executables
CheckWINDOWS()
{
    AC_MSG_CHECKING(Windows compiler)
    have_win32_gcc=no
    AC_TRY_COMPILE([
     #include <windows.h>
    ],[
    ],[
    have_win32_gcc=yes
    ])
    AC_MSG_RESULT($have_win32_gcc)
    if test x$have_win32_gcc != xyes; then
       AC_MSG_ERROR([
*** Your compiler ($CC) does not produce Windows executables!
       ])
    fi

    AC_MSG_CHECKING(Windows CE)
    have_wince=no
    AC_TRY_COMPILE([
#if !defined(_WIN32_WCE) && !defined(__MINGW32CE__)
#error This is not Windows CE
#endif
    ],[
    ],[
    have_wince=yes
       AC_MSG_ERROR([
*** Sorry, Windows CE is no longer supported.
       ])
    ])
    AC_MSG_RESULT($have_wince)

    # This fixes Windows stack alignment with newer GCC
    CheckStackBoundary
}

dnl Find the DirectX includes and libraries
CheckDIRECTX()
{
    AC_ARG_ENABLE(directx,
AC_HELP_STRING([--enable-directx], [use DirectX for Windows audio/video [[default=yes]]]),
                  , enable_directx=yes)
    if test x$enable_directx = xyes; then
        AC_CHECK_HEADER(d3d9.h, have_d3d=yes)
        AC_CHECK_HEADER(ddraw.h, have_ddraw=yes)
        AC_CHECK_HEADER(dsound.h, have_dsound=yes)
        AC_CHECK_HEADER(dinput.h, have_dinput=yes)
        AC_CHECK_HEADER(xaudio2.h, have_xaudio2=yes)

        # FIXME: latest Cygwin finds dinput headers, but we die on other win32 headers.
        # FIXME:  ...so force it off for now.
        case "$host" in
            *-*-cygwin*)
            have_dinput=false
            ;;
        esac
    fi
}

dnl Check for the dlfcn.h interface for dynamically loading objects
CheckDLOPEN()
{
    AC_ARG_ENABLE(sdl-dlopen,
AC_HELP_STRING([--enable-sdl-dlopen], [use dlopen for shared object loading [[default=yes]]]),
                  , enable_sdl_dlopen=yes)
    if test x$enable_sdl_dlopen = xyes; then
        AC_MSG_CHECKING(for dlopen)
        have_dlopen=no
        AC_TRY_COMPILE([
         #include <dlfcn.h>
        ],[
         void *handle = dlopen("", RTLD_NOW);
         const char *loaderror = (char *) dlerror();
        ],[
        have_dlopen=yes
        ])
        AC_MSG_RESULT($have_dlopen)

        if test x$have_dlopen = xyes; then
            AC_CHECK_LIB(c, dlopen, EXTRA_LDFLAGS="$EXTRA_LDFLAGS",
               AC_CHECK_LIB(dl, dlopen, EXTRA_LDFLAGS="$EXTRA_LDFLAGS -ldl",
                  AC_CHECK_LIB(ltdl, dlopen, EXTRA_LDFLAGS="$EXTRA_LDFLAGS -lltdl")))
            AC_DEFINE(SDL_LOADSO_DLOPEN, 1, [ ])
            SOURCES="$SOURCES $srcdir/src/loadso/dlopen/*.c"
            have_loadso=yes
        fi
    fi
}

dnl Check for the usbhid(3) library on *BSD
CheckUSBHID()
{
    if test x$enable_joystick = xyes; then
        AC_CHECK_LIB(usbhid, hid_init, have_libusbhid=yes)
        if test x$have_libusbhid = xyes; then
            AC_CHECK_HEADER(usbhid.h, [USB_CFLAGS="-DHAVE_USBHID_H"])
            AC_CHECK_HEADER(libusbhid.h, [USB_CFLAGS="-DHAVE_LIBUSBHID_H"])
            USB_LIBS="$USB_LIBS -lusbhid"
        else
            AC_CHECK_HEADER(usb.h, [USB_CFLAGS="-DHAVE_USB_H"])
            AC_CHECK_HEADER(libusb.h, [USB_CFLAGS="-DHAVE_LIBUSB_H"])
            AC_CHECK_LIB(usb, hid_init, [USB_LIBS="$USB_LIBS -lusb"])
        fi
            
        save_CFLAGS="$CFLAGS"
        CFLAGS="$CFLAGS $USB_CFLAGS"

        AC_MSG_CHECKING(for usbhid)
        have_usbhid=no
        AC_TRY_COMPILE([
          #include <sys/types.h>
          #if defined(HAVE_USB_H)
          #include <usb.h>
          #endif
          #ifdef __DragonFly__
          # include <bus/usb/usb.h>
          # include <bus/usb/usbhid.h>
          #else
          # include <dev/usb/usb.h>
          # include <dev/usb/usbhid.h>
          #endif
          #if defined(HAVE_USBHID_H)
          #include <usbhid.h>
          #elif defined(HAVE_LIBUSB_H)
          #include <libusb.h>
          #elif defined(HAVE_LIBUSBHID_H)
          #include <libusbhid.h>
          #endif
        ],[
          struct report_desc *repdesc;
          struct usb_ctl_report *repbuf;
          hid_kind_t hidkind;
        ],[
        have_usbhid=yes
        ])
        AC_MSG_RESULT($have_usbhid)

        if test x$have_usbhid = xyes; then
            AC_MSG_CHECKING(for ucr_data member of usb_ctl_report)
            have_usbhid_ucr_data=no
            AC_TRY_COMPILE([
              #include <sys/types.h>
              #if defined(HAVE_USB_H)
              #include <usb.h>
              #endif
              #ifdef __DragonFly__
              # include <bus/usb/usb.h>
              # include <bus/usb/usbhid.h>
              #else
              # include <dev/usb/usb.h>
              # include <dev/usb/usbhid.h>
              #endif
              #if defined(HAVE_USBHID_H)
              #include <usbhid.h>
              #elif defined(HAVE_LIBUSB_H)
              #include <libusb.h>
              #elif defined(HAVE_LIBUSBHID_H)
              #include <libusbhid.h>
              #endif
            ],[
              struct usb_ctl_report buf;
              if (buf.ucr_data) { }
            ],[
            have_usbhid_ucr_data=yes
            ])
            if test x$have_usbhid_ucr_data = xyes; then
                USB_CFLAGS="$USB_CFLAGS -DUSBHID_UCR_DATA"
            fi
            AC_MSG_RESULT($have_usbhid_ucr_data)
            
            AC_MSG_CHECKING(for new usbhid API)
            have_usbhid_new=no
            AC_TRY_COMPILE([
              #include <sys/types.h>
              #if defined(HAVE_USB_H)
              #include <usb.h>
              #endif
              #ifdef __DragonFly__
              #include <bus/usb/usb.h>
              #include <bus/usb/usbhid.h>
              #else
              #include <dev/usb/usb.h>
              #include <dev/usb/usbhid.h>
              #endif
              #if defined(HAVE_USBHID_H)
              #include <usbhid.h>
              #elif defined(HAVE_LIBUSB_H)
              #include <libusb.h>
              #elif defined(HAVE_LIBUSBHID_H)
              #include <libusbhid.h>
              #endif
            ],[
              report_desc_t d;
              hid_start_parse(d, 1, 1);
            ],[
            have_usbhid_new=yes
            ])
            if test x$have_usbhid_new = xyes; then
                USB_CFLAGS="$USB_CFLAGS -DUSBHID_NEW"
            fi
            AC_MSG_RESULT($have_usbhid_new)

            AC_MSG_CHECKING(for struct joystick in machine/joystick.h)
            have_machine_joystick=no
            AC_TRY_COMPILE([
              #include <machine/joystick.h>
            ],[
              struct joystick t;
            ],[
            have_machine_joystick=yes
            ])
            if test x$have_machine_joystick = xyes; then
                AC_DEFINE(SDL_JOYSTICK_USBHID_MACHINE_JOYSTICK_H, 1, [ ])
            fi
            AC_MSG_RESULT($have_machine_joystick)

            AC_DEFINE(SDL_JOYSTICK_USBHID, 1, [ ])
            SOURCES="$SOURCES $srcdir/src/joystick/bsd/*.c"
            EXTRA_CFLAGS="$EXTRA_CFLAGS $USB_CFLAGS"
            EXTRA_LDFLAGS="$EXTRA_LDFLAGS $USB_LIBS"
            have_joystick=yes
        fi
        CFLAGS="$save_CFLAGS"
    fi
}

dnl Check for clock_gettime()
CheckClockGettime()
{
    AC_ARG_ENABLE(clock_gettime,
AC_HELP_STRING([--enable-clock_gettime], [use clock_gettime() instead of gettimeofday() on UNIX [[default=yes]]]),
                  , enable_clock_gettime=yes)
    if test x$enable_clock_gettime = xyes; then
        AC_CHECK_LIB(rt, clock_gettime, have_clock_gettime=yes)
        if test x$have_clock_gettime = xyes; then
            AC_DEFINE(HAVE_CLOCK_GETTIME, 1, [ ])
            EXTRA_LDFLAGS="$EXTRA_LDFLAGS -lrt"
        else
            AC_CHECK_LIB(c, clock_gettime, have_clock_gettime=yes)
            if test x$have_clock_gettime = xyes; then
               AC_DEFINE(HAVE_CLOCK_GETTIME, 1, [ ])
               EXTRA_LDFLAGS="$EXTRA_LDFLAGS"
            fi
        fi
    fi
}

dnl Check for a valid linux/version.h
CheckLinuxVersion()
{
    AC_CHECK_HEADER(linux/version.h, have_linux_version_h=yes)
    if test x$have_linux_version_h = xyes; then
        EXTRA_CFLAGS="$EXTRA_CFLAGS -DHAVE_LINUX_VERSION_H"
    fi
}

dnl Check if we want to use RPATH
CheckRPATH()
{
    AC_ARG_ENABLE(rpath,
AC_HELP_STRING([--enable-rpath], [use an rpath when linking SDL [[default=yes]]]),
                  , enable_rpath=yes)
}

dnl Set up the configuration based on the host platform!
case "$host" in
    *-*-linux*|*-*-uclinux*|*-*-gnu*|*-*-k*bsd*-gnu|*-*-bsdi*|*-*-freebsd*|*-*-dragonfly*|*-*-netbsd*|*-*-openbsd*|*-*-sysv5*|*-*-solaris*|*-*-hpux*|*-*-aix*|*-*-minix*)
        case "$host" in
            *-*-linux*)         ARCH=linux ;;
            *-*-uclinux*)       ARCH=linux ;;
            *-*-kfreebsd*-gnu)  ARCH=kfreebsd-gnu ;;
            *-*-knetbsd*-gnu)   ARCH=knetbsd-gnu ;;
            *-*-kopenbsd*-gnu)  ARCH=kopenbsd-gnu ;;
            *-*-gnu*)           ARCH=gnu ;; # must be last of the gnu variants
            *-*-bsdi*)          ARCH=bsdi ;;
            *-*-freebsd*)       ARCH=freebsd ;;
            *-*-dragonfly*)     ARCH=freebsd ;;
            *-*-netbsd*)        ARCH=netbsd ;;
            *-*-openbsd*)       ARCH=openbsd ;;
            *-*-sysv5*)         ARCH=sysv5 ;;
            *-*-solaris*)       ARCH=solaris ;;
            *-*-hpux*)          ARCH=hpux ;;
            *-*-aix*)           ARCH=aix ;;
            *-*-minix*)         ARCH=minix ;;
        esac
        CheckVisibilityHidden
        CheckDummyVideo
        CheckDiskAudio
        CheckDummyAudio
        CheckDLOPEN
        CheckOSS
        CheckALSA
        CheckPulseAudio
        CheckARTSC
        CheckESD
        CheckNAS
        CheckSNDIO
        CheckX11
        CheckDirectFB
        CheckFusionSound
        CheckOpenGLX11
        CheckOpenGLESX11
        CheckLibUDev
        CheckDBus
        CheckInputEvents
        CheckTslib
        CheckUSBHID
        CheckPTHREAD
        CheckClockGettime
        CheckLinuxVersion
        CheckRPATH
        # Set up files for the audio library
        if test x$enable_audio = xyes; then
          case $ARCH in
            sysv5|solaris|hpux)
                AC_DEFINE(SDL_AUDIO_DRIVER_SUNAUDIO, 1, [ ])
                SOURCES="$SOURCES $srcdir/src/audio/sun/*.c"
                have_audio=yes
            ;;
            netbsd)  # Don't use this on OpenBSD, it's busted.
                AC_DEFINE(SDL_AUDIO_DRIVER_BSD, 1, [ ])
                SOURCES="$SOURCES $srcdir/src/audio/bsd/*.c"
                have_audio=yes
            ;;
            aix)
                AC_DEFINE(SDL_AUDIO_DRIVER_PAUDIO, 1, [ ])
                SOURCES="$SOURCES $srcdir/src/audio/paudio/*.c"
                have_audio=yes
            ;;
          esac
        fi
        # Set up files for the joystick library
        if test x$enable_joystick = xyes; then
          case $ARCH in
            linux)
                AC_DEFINE(SDL_JOYSTICK_LINUX, 1, [ ])
                SOURCES="$SOURCES $srcdir/src/joystick/linux/*.c"
                have_joystick=yes
            ;;
          esac
        fi
        # Set up files for the haptic library
        if test x$enable_haptic = xyes; then
           if test x$use_input_events = xyes; then
             case $ARCH in
               linux)
                   AC_DEFINE(SDL_HAPTIC_LINUX, 1, [ ])
                   SOURCES="$SOURCES $srcdir/src/haptic/linux/*.c"
                   have_haptic=yes
               ;;
             esac
           fi
        fi
        # Set up files for the power library
        if test x$enable_power = xyes; then
             case $ARCH in
               linux)
                   AC_DEFINE(SDL_POWER_LINUX, 1, [ ])
                   SOURCES="$SOURCES $srcdir/src/power/linux/*.c"
                   have_power=yes
               ;;
             esac
        fi
        # Set up files for the timer library
        if test x$enable_timers = xyes; then
            AC_DEFINE(SDL_TIMER_UNIX, 1, [ ])
            SOURCES="$SOURCES $srcdir/src/timer/unix/*.c"
            have_timers=yes
        fi
        ;;
    *-*-cygwin* | *-*-mingw32*)
        ARCH=win32
        if test "$build" != "$host"; then # cross-compiling
            # Default cross-compile location
            ac_default_prefix=/usr/local/cross-tools/$host
        else
            # Look for the location of the tools and install there
            if test "$BUILD_PREFIX" != ""; then
                ac_default_prefix=$BUILD_PREFIX
            fi
        fi
        CheckDummyVideo
        CheckDiskAudio
        CheckDummyAudio
        CheckWINDOWS
        CheckWINDOWSGL
        CheckDIRECTX

        # Set up the core platform files
        SOURCES="$SOURCES $srcdir/src/core/windows/*.c"

        # Set up files for the video library
        if test x$enable_video = xyes; then
            AC_DEFINE(SDL_VIDEO_DRIVER_WINDOWS, 1, [ ])
            SOURCES="$SOURCES $srcdir/src/video/windows/*.c"
            have_video=yes
            AC_ARG_ENABLE(render-d3d,
AC_HELP_STRING([--enable-render-d3d], [enable the Direct3D render driver [[default=yes]]]),
                                , enable_render_d3d=yes)
            if test x$enable_render_d3d = xyes -a x$have_d3d = xyes; then
                AC_DEFINE(SDL_VIDEO_RENDER_D3D, 1, [ ])
            fi
        fi
        # Set up files for the audio library
        if test x$enable_audio = xyes; then
            AC_DEFINE(SDL_AUDIO_DRIVER_WINMM, 1, [ ])
            SOURCES="$SOURCES $srcdir/src/audio/winmm/*.c"
            if test x$have_dsound = xyes; then
                AC_DEFINE(SDL_AUDIO_DRIVER_DSOUND, 1, [ ])
                SOURCES="$SOURCES $srcdir/src/audio/directsound/*.c"
            fi
            if test x$have_xaudio2 = xyes; then
                AC_DEFINE(SDL_AUDIO_DRIVER_XAUDIO2, 1, [ ])
                SOURCES="$SOURCES $srcdir/src/audio/xaudio2/*.c"
            fi
            have_audio=yes
        fi
        # Set up files for the joystick library
        if test x$enable_joystick = xyes; then
            if test x$have_dinput = xyes; then
                AC_DEFINE(SDL_JOYSTICK_DINPUT, 1, [ ])
                SOURCES="$SOURCES $srcdir/src/joystick/windows/SDL_dxjoystick.c"
                EXTRA_LDFLAGS="$EXTRA_LDFLAGS -ldinput8 -ldxguid -ldxerr8"
            else
                AC_DEFINE(SDL_JOYSTICK_WINMM, 1, [ ])
                SOURCES="$SOURCES $srcdir/src/joystick/windows/SDL_mmjoystick.c"
            fi
            have_joystick=yes
        fi
        if test x$enable_haptic = xyes; then
            if test x$have_dinput = xyes; then
                AC_DEFINE(SDL_HAPTIC_DINPUT, 1, [ ])
                SOURCES="$SOURCES $srcdir/src/haptic/windows/SDL_syshaptic.c"
                have_haptic=yes
            fi
        fi
        if test x$enable_power = xyes; then
            AC_DEFINE(SDL_POWER_WINDOWS, 1, [ ])
            SOURCES="$SOURCES $srcdir/src/power/windows/SDL_syspower.c"
            have_power=yes
        fi
        # Set up files for the thread library
        if test x$enable_threads = xyes; then
            AC_DEFINE(SDL_THREAD_WINDOWS, 1, [ ])
            SOURCES="$SOURCES $srcdir/src/thread/windows/*.c"
            SOURCES="$SOURCES $srcdir/src/thread/generic/SDL_syscond.c"
            have_threads=yes
        fi
        # Set up files for the timer library
        if test x$enable_timers = xyes; then
            AC_DEFINE(SDL_TIMER_WINDOWS, 1, [ ])
            SOURCES="$SOURCES $srcdir/src/timer/windows/*.c"
            have_timers=yes
        fi
        # Set up files for the shared object loading library
        if test x$enable_loadso = xyes; then
            AC_DEFINE(SDL_LOADSO_WINDOWS, 1, [ ])
            SOURCES="$SOURCES $srcdir/src/loadso/windows/*.c"
            have_loadso=yes
        fi
        # Set up the system libraries we need
        EXTRA_LDFLAGS="$EXTRA_LDFLAGS -luser32 -lgdi32 -lwinmm -limm32 -lole32 -loleaut32 -lshell32 -lversion -luuid -XCClinker -static-libgcc"
        # The Windows platform requires special setup
        VERSION_SOURCES="$srcdir/src/main/windows/*.rc"
        SDLMAIN_SOURCES="$srcdir/src/main/windows/*.c"
        SDL_CFLAGS="$SDL_CFLAGS -Dmain=SDL_main"
        SDL_LIBS="-lSDL2main $SDL_LIBS -mwindows"

        # Check to see if this is a mingw or cygwin build
        have_mingw32=
        AC_CHECK_LIB(mingw32, main, [have_mingw32=yes])
        if test x$have_mingw32 = xyes; then
            SDL_LIBS="-lmingw32 $SDL_LIBS"
        else
            SDL_LIBS="-lcygwin $SDL_LIBS"
        fi
        ;;
    *-*-beos* | *-*-haiku*)
        ARCH=beos
        ac_default_prefix=/boot/common
        CheckDummyVideo
        CheckDiskAudio
        CheckDummyAudio
        CheckBWINDOW
        CheckBeGL
        # Set up files for the audio library
        if test x$enable_audio = xyes; then
            AC_DEFINE(SDL_AUDIO_DRIVER_BEOSAUDIO, 1, [ ])
            SOURCES="$SOURCES $srcdir/src/audio/baudio/*.cc"
            have_audio=yes
        fi
        # Set up files for the joystick library
        if test x$enable_joystick = xyes; then
            AC_DEFINE(SDL_JOYSTICK_BEOS, 1, [ ])
            SOURCES="$SOURCES $srcdir/src/joystick/beos/*.cc"
            have_joystick=yes
        fi
        # Set up files for the thread library
        if test x$enable_threads = xyes; then
            AC_DEFINE(SDL_THREAD_BEOS, 1, [ ])
            SOURCES="$SOURCES $srcdir/src/thread/beos/*.c"
            SOURCES="$SOURCES $srcdir/src/thread/generic/SDL_sysmutex.c"
            SOURCES="$SOURCES $srcdir/src/thread/generic/SDL_syscond.c"
            have_threads=yes
        fi
        # Set up files for the timer library
        if test x$enable_timers = xyes; then
            AC_DEFINE(SDL_TIMER_BEOS, 1, [ ])
            SOURCES="$SOURCES $srcdir/src/timer/beos/*.c"
            have_timers=yes
        fi
        # Set up files for the shared object loading library
        if test x$enable_loadso = xyes; then
            AC_DEFINE(SDL_LOADSO_BEOS, 1, [ ])
            SOURCES="$SOURCES $srcdir/src/loadso/beos/*.c"
            have_loadso=yes
        fi
        # Set up files for the system power library
        if test x$enable_power = xyes; then
            AC_DEFINE(SDL_POWER_BEOS, 1, [ ])
            SOURCES="$SOURCES $srcdir/src/power/beos/*.c"
            have_power=yes
        fi
        # The BeOS platform requires special setup.
        SOURCES="$srcdir/src/main/beos/*.cc $SOURCES"
        EXTRA_LDFLAGS="$EXTRA_LDFLAGS -lroot -lbe -lmedia -lgame -ldevice -ltextencoding"
        ;;
    arm*-apple-darwin*)
        # iOS - We are not writing anything to confdefs.h because you have to replace
        # SDL_config.h for SDL_config_iphoneos.h anyway
        ARCH=ios

        CheckVisibilityHidden
        CheckDummyVideo
        CheckDiskAudio
        CheckDummyAudio
        CheckDLOPEN
        CheckCOCOA
        CheckPTHREAD


        # Set up files for the audio library
        if test x$enable_audio = xyes; then
            SOURCES="$SOURCES $srcdir/src/audio/coreaudio/*.c"
            have_audio=yes
        fi
        # Set up files for the joystick library
        if test x$enable_joystick = xyes; then
            SOURCES="$SOURCES $srcdir/src/joystick/iphoneos/*.m"
            have_joystick=yes
        fi
        # Set up files for the haptic library
        #if test x$enable_haptic = xyes; then
        #    SOURCES="$SOURCES $srcdir/src/haptic/darwin/*.c"
        #    have_haptic=yes
        #    EXTRA_LDFLAGS="$EXTRA_LDFLAGS -Wl,-framework,ForceFeedback"
        #fi
        # Set up files for the power library
        if test x$enable_power = xyes; then
            SOURCES="$SOURCES $srcdir/src/power/uikit/*.m"
            have_power=yes
        fi
        # Set up files for the timer library
        if test x$enable_timers = xyes; then
            SOURCES="$SOURCES $srcdir/src/timer/unix/*.c"
            have_timers=yes
        fi
        # Set up additional files for the file library
        if test x$enable_file = xyes; then
            SOURCES="$SOURCES $srcdir/src/file/cocoa/*.m"
        fi
        # The iOS platform requires special setup.
        SOURCES="$SOURCES $srcdir/src/video/uikit/*.m"
        EXTRA_CFLAGS="$EXTRA_CFLAGS -fpascal-strings"
        EXTRA_LDFLAGS="$EXTRA_LDFLAGS -lm -liconv -lobjc"
        EXTRA_LDFLAGS="$EXTRA_LDFLAGS -Wl,-framework,Foundation"
        EXTRA_LDFLAGS="$EXTRA_LDFLAGS -Wl,-framework,UIKit"
        EXTRA_LDFLAGS="$EXTRA_LDFLAGS -Wl,-framework,OpenGLES"
        EXTRA_LDFLAGS="$EXTRA_LDFLAGS -Wl,-framework,QuartzCore"
        EXTRA_LDFLAGS="$EXTRA_LDFLAGS -Wl,-framework,CoreAudio"
        EXTRA_LDFLAGS="$EXTRA_LDFLAGS -Wl,-framework,AudioToolbox"
        EXTRA_LDFLAGS="$EXTRA_LDFLAGS -Wl,-framework,CoreGraphics"
        ;;
    *-*-darwin* )
        # This could be either full "Mac OS X", or plain "Darwin" which is
        # just the OS X kernel sans upper layers like Carbon and Cocoa.
        # Next line is broken, and a few files below require Mac OS X (full)
        ARCH=macosx

        # Mac OS X builds with both the Carbon and OSX APIs at the moment
        EXTRA_CFLAGS="$EXTRA_CFLAGS -DTARGET_API_MAC_CARBON"
        EXTRA_CFLAGS="$EXTRA_CFLAGS -DTARGET_API_MAC_OSX"

        CheckVisibilityHidden
        CheckDummyVideo
        CheckDiskAudio
        CheckDummyAudio
        CheckDLOPEN
        CheckCOCOA
        CheckX11
        CheckMacGL
        CheckOpenGLX11
        CheckPTHREAD

        # Good optimization on Mac OS X, yes...
        EXTRA_CFLAGS="$EXTRA_CFLAGS -falign-loops=16"

        # Need this or things might misbuild on a G3.
        EXTRA_CFLAGS="$EXTRA_CFLAGS -force_cpusubtype_ALL"

        # Set up files for the audio library
        if test x$enable_audio = xyes; then
            AC_DEFINE(SDL_AUDIO_DRIVER_COREAUDIO, 1, [ ])
            SOURCES="$SOURCES $srcdir/src/audio/coreaudio/*.c"
            have_audio=yes
        fi
        # Set up files for the joystick library
        if test x$enable_joystick = xyes; then
            AC_DEFINE(SDL_JOYSTICK_IOKIT, 1, [ ])
            SOURCES="$SOURCES $srcdir/src/joystick/darwin/*.c"
            have_joystick=yes
        fi
        # Set up files for the haptic library
        if test x$enable_haptic = xyes; then
            AC_DEFINE(SDL_HAPTIC_IOKIT, 1, [ ])
            SOURCES="$SOURCES $srcdir/src/haptic/darwin/*.c"
            have_haptic=yes
            EXTRA_LDFLAGS="$EXTRA_LDFLAGS -Wl,-framework,ForceFeedback"
        fi
        # Set up files for the power library
        if test x$enable_power = xyes; then
            AC_DEFINE(SDL_POWER_MACOSX, 1, [ ])
            SOURCES="$SOURCES $srcdir/src/power/macosx/*.c"
            have_power=yes
        fi
        # Set up files for the timer library
        if test x$enable_timers = xyes; then
            AC_DEFINE(SDL_TIMER_UNIX, 1, [ ])
            SOURCES="$SOURCES $srcdir/src/timer/unix/*.c"
            have_timers=yes
        fi
        # Set up additional files for the file library
        if test x$enable_file = xyes; then
            SOURCES="$SOURCES $srcdir/src/file/cocoa/*.m"
        fi
        # The Mac OS X platform requires special setup.
        EXTRA_CFLAGS="$EXTRA_CFLAGS -fpascal-strings"
        EXTRA_LDFLAGS="$EXTRA_LDFLAGS -lobjc"
        EXTRA_LDFLAGS="$EXTRA_LDFLAGS -Wl,-framework,Cocoa"
        EXTRA_LDFLAGS="$EXTRA_LDFLAGS -Wl,-framework,Carbon"
        EXTRA_LDFLAGS="$EXTRA_LDFLAGS -Wl,-framework,IOKit"
        # If audio is used, add the AudioUnit framework
        if test x$enable_audio = xyes; then
            EXTRA_LDFLAGS="$EXTRA_LDFLAGS -Wl,-framework,CoreAudio -Wl,-framework,AudioToolbox -Wl,-framework,AudioUnit"
        fi
        ;;
    *)
        AC_MSG_ERROR([
*** Unsupported host:  Please add to configure.in
        ])
        ;;
esac

dnl Do this on all platforms, after everything else.
CheckWarnAll

# Verify that we have all the platform specific files we need

if test x$have_joystick != xyes; then
    if test x$enable_joystick = xyes; then
        AC_DEFINE(SDL_JOYSTICK_DISABLED, 1, [ ])
    fi
    SOURCES="$SOURCES $srcdir/src/joystick/dummy/*.c"
fi
if test x$have_haptic != xyes; then
    if test x$enable_haptic = xyes; then
        AC_DEFINE(SDL_HAPTIC_DISABLED, 1, [ ])
    fi
    SOURCES="$SOURCES $srcdir/src/haptic/dummy/*.c"
fi
if test x$have_threads != xyes; then
    if test x$enable_threads = xyes; then
        AC_DEFINE(SDL_THREADS_DISABLED, 1, [ ])
    fi
    SOURCES="$SOURCES $srcdir/src/thread/generic/*.c"
fi
if test x$have_timers != xyes; then
    if test x$enable_timers = xyes; then
        AC_DEFINE(SDL_TIMERS_DISABLED, 1, [ ])
    fi
    SOURCES="$SOURCES $srcdir/src/timer/dummy/*.c"
fi
if test x$have_loadso != xyes; then
    if test x$enable_loadso = xyes; then
        AC_DEFINE(SDL_LOADSO_DISABLED, 1, [ ])
    fi
    SOURCES="$SOURCES $srcdir/src/loadso/dummy/*.c"
fi
if test x$SDLMAIN_SOURCES = x; then
    SDLMAIN_SOURCES="$srcdir/src/main/dummy/*.c"
fi
SDLTEST_SOURCES="$srcdir/src/test/*.c"

OBJECTS=`echo $SOURCES`
DEPENDS=`echo $SOURCES | tr ' ' '\n'`
for EXT in asm cc m c S; do
    OBJECTS=`echo "$OBJECTS" | sed 's,[[^ ]]*/\([[^ ]]*\)\.'$EXT',$(objects)/\1.lo,g'`
    DEPENDS=`echo "$DEPENDS" | sed "s,^\\([[^ ]]*\\)/\\([[^ ]]*\\)\\.$EXT\\$,\\\\
\\$(objects)/\\2.lo: \\1/\\2.$EXT\\\\
	\\$(LIBTOOL) --mode=compile \\$(CC) \\$(CFLAGS) \\$(EXTRA_CFLAGS) $DEPENDENCY_TRACKING_OPTIONS -c \\$< -o \\$@,g"`
done

VERSION_OBJECTS=`echo $VERSION_SOURCES`
VERSION_DEPENDS=`echo $VERSION_SOURCES`
VERSION_OBJECTS=`echo "$VERSION_OBJECTS" | sed 's,[[^ ]]*/\([[^ ]]*\)\.rc,$(objects)/\1.o,g'`
VERSION_DEPENDS=`echo "$VERSION_DEPENDS" | sed "s,\\([[^ ]]*\\)/\\([[^ ]]*\\)\\.rc,\\\\
\\$(objects)/\\2.o: \\1/\\2.rc\\\\
	\\$(WINDRES) \\$< \\$@,g"`

SDLMAIN_OBJECTS=`echo $SDLMAIN_SOURCES`
SDLMAIN_DEPENDS=`echo $SDLMAIN_SOURCES`
SDLMAIN_OBJECTS=`echo "$SDLMAIN_OBJECTS" | sed 's,[[^ ]]*/\([[^ ]]*\)\.c,$(objects)/\1.o,g'`
SDLMAIN_DEPENDS=`echo "$SDLMAIN_DEPENDS" | sed "s,\\([[^ ]]*\\)/\\([[^ ]]*\\)\\.c,\\\\
\\$(objects)/\\2.o: \\1/\\2.c\\\\
	\\$(LIBTOOL) --mode=compile \\$(CC) \\$(CFLAGS) \\$(EXTRA_CFLAGS) $DEPENDENCY_TRACKING_OPTIONS -c \\$< -o \\$@,g"`

SDLTEST_OBJECTS=`echo $SDLTEST_SOURCES`
SDLTEST_DEPENDS=`echo $SDLTEST_SOURCES`
SDLTEST_OBJECTS=`echo "$SDLTEST_OBJECTS" | sed 's,[[^ ]]*/\([[^ ]]*\)\.c,$(objects)/\1.o,g'`
SDLTEST_DEPENDS=`echo "$SDLTEST_DEPENDS" | sed "s,\\([[^ ]]*\\)/\\([[^ ]]*\\)\\.c,\\\\
\\$(objects)/\\2.o: \\1/\\2.c\\\\
	\\$(LIBTOOL) --mode=compile \\$(CC) \\$(CFLAGS) \\$(EXTRA_CFLAGS) $DEPENDENCY_TRACKING_OPTIONS -c \\$< -o \\$@,g"`

# Set runtime shared library paths as needed

if test "x$enable_rpath" = "xyes"; then
  if test $ARCH = bsdi -o $ARCH = freebsd -o $ARCH = linux -o $ARCH = netbsd; then
    SDL_RLD_FLAGS="-Wl,-rpath,\${libdir}"
  fi
  if test $ARCH = solaris; then
    SDL_RLD_FLAGS="-R\${libdir}"
  fi
else
  SDL_RLD_FLAGS=""
fi

SDL_STATIC_LIBS="$SDL_LIBS $EXTRA_LDFLAGS"

dnl Expand the cflags and libraries needed by apps using SDL
AC_SUBST(SDL_CFLAGS)
AC_SUBST(SDL_LIBS)
AC_SUBST(SDL_STATIC_LIBS)
AC_SUBST(SDL_RLD_FLAGS)
if test x$enable_shared = xyes; then
    ENABLE_SHARED_TRUE=
    ENABLE_SHARED_FALSE="#"
else
    ENABLE_SHARED_TRUE="#"
    ENABLE_SHARED_FALSE=
fi
if test x$enable_static = xyes; then
    ENABLE_STATIC_TRUE=
    ENABLE_STATIC_FALSE="#"
else
    ENABLE_STATIC_TRUE="#"
    ENABLE_STATIC_FALSE=
fi
AC_SUBST(ENABLE_SHARED_TRUE)
AC_SUBST(ENABLE_SHARED_FALSE)
AC_SUBST(ENABLE_STATIC_TRUE)
AC_SUBST(ENABLE_STATIC_FALSE)

dnl Expand the sources and objects needed to build the library
AC_SUBST(ac_aux_dir)
AC_SUBST(INCLUDE)
AC_SUBST(OBJECTS)
AC_SUBST(VERSION_OBJECTS)
AC_SUBST(SDLMAIN_OBJECTS)
AC_SUBST(SDLTEST_OBJECTS)
AC_SUBST(BUILD_CFLAGS)
AC_SUBST(EXTRA_CFLAGS)
AC_SUBST(BUILD_LDFLAGS)
AC_SUBST(EXTRA_LDFLAGS)
AC_SUBST(WINDRES)

cat >Makefile.rules <<__EOF__

# Build rules for objects
-include \$(OBJECTS:.lo=.d)

# Special dependency for SDL.c, since it depends on SDL_revision.h
$srcdir/src/SDL.c: update-revision
$DEPENDS
$VERSION_DEPENDS
$SDLMAIN_DEPENDS
$SDLTEST_DEPENDS
__EOF__

AC_CONFIG_FILES([
    Makefile:Makefile.in:Makefile.rules sdl2-config SDL2.spec sdl2.pc
])
AC_OUTPUT
chmod a+x sdl2-config