Tue, 22 Feb 2005 17:57:40 +0000 Preliminary support for Blowup and Screen Blaster 3 extensions on Atari Falcon 030
Patrice Mandin <patmandin@gmail.com> [Tue, 22 Feb 2005 17:57:40 +0000] rev 1040
Preliminary support for Blowup and Screen Blaster 3 extensions on Atari Falcon 030
Tue, 15 Feb 2005 11:50:33 +0000 Added testblitspeed to aid in profiling of SDL's blitters.
Ryan C. Gordon <icculus@icculus.org> [Tue, 15 Feb 2005 11:50:33 +0000] rev 1039
Added testblitspeed to aid in profiling of SDL's blitters.
Sun, 13 Feb 2005 07:10:02 +0000 Ugly hack to make this work with gcc 2.x and 3.x
Sam Lantinga <slouken@libsdl.org> [Sun, 13 Feb 2005 07:10:02 +0000] rev 1038
Ugly hack to make this work with gcc 2.x and 3.x Thanks to Stephane Marchesin for the dirty dirty work.
Sat, 12 Feb 2005 19:39:08 +0000 Date: Tue, 01 Feb 2005 17:53:07 -0800
Sam Lantinga <slouken@libsdl.org> [Sat, 12 Feb 2005 19:39:08 +0000] rev 1037
Date: Tue, 01 Feb 2005 17:53:07 -0800 From: Bill May Subject: [SDL] Diffs for dsp audio in case of failures. The rewrite recently done for 1.2.8 forgot to handle error cases by closing the audio. Here is a patch that does.
Sat, 12 Feb 2005 18:03:54 +0000 [SDL] [PATCH] fix FB_VideoQuit for ia64
Sam Lantinga <slouken@libsdl.org> [Sat, 12 Feb 2005 18:03:54 +0000] rev 1036
[SDL] [PATCH] fix FB_VideoQuit for ia64 Jesse Barnes Fri Jan 14 11:13:54 PST 2005 I noticed that on my ia64 machine when SDL_Quit was called, the machine would hang in weird ways. It turned out to be caused by a machine check in the memset() call near the top of FB_VideoQuit. Generally memset shouldn't be used on I/O regions like the framebuffer or other I/O device memory (the Linux kernel has special routines for dealing with I/O memory), so I changed the #ifdef __powerpc__ to #if defined(__powerpc__) || defined(__ia64__) and SDL_Quit now works properly. The change should probably be made unconditional though since doing one byte at a time is the only way to be portable, afaik.
Sat, 12 Feb 2005 18:01:31 +0000 Date: Wed, 26 Jan 2005 13:37:09 GMT
Sam Lantinga <slouken@libsdl.org> [Sat, 12 Feb 2005 18:01:31 +0000] rev 1035
Date: Wed, 26 Jan 2005 13:37:09 GMT From: Peter Naulls Subject: RISC OS SDL Patches Sam, I've attached a diff of the latest changes to libSDL for RISC OS support. These changes are by Alan Buckley and myself. The most significant of these are: Optimised assembler blit rountines - I've attached the file src/video/riscos/SDL_riscosASM.s which is needed for this. Move to using /dev/dsp instead of its own audio implementation. This means that src/audio/riscos/SDL_drenderer.c should be removed Typo fixes. Mainly correct spelling of "RISC OS", but some from elsewhere too.
Sat, 29 Jan 2005 09:58:40 +0000 clear convert.buf before filling it
Patrice Mandin <patmandin@gmail.com> [Sat, 29 Jan 2005 09:58:40 +0000] rev 1034
clear convert.buf before filling it
Tue, 25 Jan 2005 17:58:44 +0000 The fix is going back in. :)
Sam Lantinga <slouken@libsdl.org> [Tue, 25 Jan 2005 17:58:44 +0000] rev 1033
The fix is going back in. :)
Tue, 25 Jan 2005 16:57:11 +0000 Date: Mon, 24 Jan 2005 21:37:56 +0800
Sam Lantinga <slouken@libsdl.org> [Tue, 25 Jan 2005 16:57:11 +0000] rev 1032
Date: Mon, 24 Jan 2005 21:37:56 +0800 From: Chris Taylor Subject: Patch to put back dynamic OpenGL loading for MPW I sent a patch a while ago that removes dynamic OpenGL loading for Macintosh Programmer's Workshop. Dynamic loading DOES actually work when an SDL program is built with MPW, it just has to be set up for it. (Whoops!!) This is the ideal way to get OpenGL extensions to work, which D2X uses quite a few of. This patch puts dynamic loading back in SDL for Mac OS 9. It applies to current CVS. I noticed that two members need to be set when DrawSprocket is used.
Tue, 18 Jan 2005 18:40:48 +0000 Date: Sun, 16 Jan 2005 19:20:15 +0100
Sam Lantinga <slouken@libsdl.org> [Tue, 18 Jan 2005 18:40:48 +0000] rev 1031
Date: Sun, 16 Jan 2005 19:20:15 +0100 From: Stephane Marchesin To: Kirill Ponomarew Subject: [SDL] Problem on x86_64 with latest CVS (Re: sdl12 with gcc-2.95) >-I../../src -I../../src/main/freebsd -I../../src/audio >-I../../src/video -I../../src/video/XFree86/extensions >-I../../src/events -I../../src/joystick -I../../src/cdrom >-I../../src/thread -I../../src/timer -I../../src/endian >-I../../src/file -I../../src/thread -MT SDL_endian.lo -MD -MP -MF >.deps/SDL_endian.Tpo -c SDL_endian.c -fPIC -DPIC -o >.libs/SDL_endian.o >{standard input}: Assembler messages: >{standard input}:144: Error: suffix or operands invalid for `xchg' >*** Error code 1 > That's a totally different problem. This was introduced in CVS 4 days ago : http://www.libsdl.org/cgi/cvsweb.cgi/SDL12/include/SDL_endian.h.diff?r1=1.11\ &r2=1.12 Just revert this patch.
(0) -1000 -300 -100 -10 +10 +100 +300 +1000 +3000 tip