/*

* Internal function/structure declaration. Do NOT include in your

* application.

*

* Please see the file LICENSE in the source's root directory.

*

* This file written by Ryan C. Gordon.

*/

#ifndef _INCLUDE_PHYSFS_INTERNAL_H_

#define _INCLUDE_PHYSFS_INTERNAL_H_

#ifndef __PHYSICSFS_INTERNAL__

#error Do not include this header from your applications.

#endif

#include "physfs.h"

#ifdef __cplusplus

extern "C" {

#endif

struct __PHYSFS_DIRHANDLE__;

struct __PHYSFS_FILEFUNCTIONS__;

typedef struct __PHYSFS_LINKEDSTRINGLIST__

} LinkedStringList;

typedef struct __PHYSFS_FILEHANDLE__

} FileHandle;

typedef struct __PHYSFS_FILEFUNCTIONS__

} FileFunctions;

typedef struct __PHYSFS_DIRHANDLE__

} DirHandle;

/*

* Symlinks should always be followed; PhysicsFS will use

* DirFunctions->isSymLink() and make a judgement on whether to

* continue to call other methods based on that.

*/

typedef struct __PHYSFS_DIRFUNCTIONS__

} DirFunctions;

/* error messages... */

#define ERR_IS_INITIALIZED "Already initialized"

#define ERR_NOT_INITIALIZED "Not initialized"

#define ERR_INVALID_ARGUMENT "Invalid argument"

#define ERR_FILES_STILL_OPEN "Files still open"

#define ERR_NO_DIR_CREATE "Failed to create directories"

#define ERR_OUT_OF_MEMORY "Out of memory"

#define ERR_NOT_IN_SEARCH_PATH "No such entry in search path"

#define ERR_NOT_SUPPORTED "Operation not supported"

#define ERR_UNSUPPORTED_ARCHIVE "Archive type unsupported"

#define ERR_NOT_A_HANDLE "Not a file handle"

#define ERR_INSECURE_FNAME "Insecure filename"

#define ERR_SYMLINK_DISALLOWED "Symbolic links are disabled"

#define ERR_NO_WRITE_DIR "Write directory is not set"

#define ERR_NO_SUCH_FILE "No such file"

#define ERR_PAST_EOF "Past end of file"

#define ERR_ARC_IS_READ_ONLY "Archive is read-only"

#define ERR_IO_ERROR "I/O error"

#define ERR_CANT_SET_WRITE_DIR "Can't set write directory"

#define ERR_SYMLINK_LOOP "Infinite symbolic link loop"

#define ERR_COMPRESSION "(De)compression error"

#define ERR_NOT_IMPLEMENTED "Not implemented"

#define ERR_OS_ERROR "Operating system reported error"

#define ERR_FILE_EXISTS "File already exists"

#define ERR_NOT_A_DIR "Not a directory"

#define ERR_FILE_NOT_FOUND "File not found"

#define ERR_NOT_AN_ARCHIVE "Not an archive"

#define ERR_CORRUPTED "Corrupted archive"

#define ERR_SEEK_OUT_OF_RANGE "Seek out of range"

#define ERR_BAD_FILENAME "Bad filename"

/*

* Call this to set the message returned by PHYSFS_getLastError().

* Please only use the ERR_* constants above, or add new constants to the

* above group, but I want these all in one place.

*

* Calling this with a NULL argument is a safe no-op.

*/

void __PHYSFS_setError(const char *err);

/*

* Convert (dirName) to platform-dependent notation, then prepend (prepend)

* and append (append) to the converted string.

*

* So, on Win32, calling:

* __PHYSFS_convertToDependent("C:\", "my/files", NULL);

* ...will return the string "C:\my\files".

*

* This is a convenience function; you might want to hack something out that

* is less generic (and therefore more efficient).

*

* Be sure to free() the return value when done with it.

*/

char *__PHYSFS_convertToDependent(const char *prepend,

const char *dirName,

const char *append);

/*

* Verify that (fname) (in platform-independent notation), in relation

* to (h) is secure. That means that each element of fname is checked

* for symlinks (if they aren't permitted). Also, elements such as

* ".", "..", or ":" are flagged.

*

* Returns non-zero if string is safe, zero if there's a security issue.

* PHYSFS_getLastError() will specify what was wrong.

*/

int __PHYSFS_verifySecurity(DirHandle *h, const char *fname);

/*

* Use this to build the list that your enumerate function should return.

* See zip.c for an example of proper use.

*/

LinkedStringList *__PHYSFS_addToLinkedStringList(LinkedStringList *retval,

LinkedStringList **prev,

const char *str,

PHYSFS_sint32 len);

/* These get used all over for lessening code clutter. */

#define BAIL_MACRO(e, r) { __PHYSFS_setError(e); return r; }

#define BAIL_IF_MACRO(c, e, r) if (c) { __PHYSFS_setError(e); return r; }

#define BAIL_MACRO_MUTEX(e, m, r) { __PHYSFS_setError(e); __PHYSFS_platformReleaseMutex(m); return r; }

#define BAIL_IF_MACRO_MUTEX(c, e, m, r) if (c) { __PHYSFS_setError(e); __PHYSFS_platformReleaseMutex(m); return r; }

/*--------------------------------------------------------------------------*/

/*--------------------------------------------------------------------------*/

/*------------ ----------------*/

/*------------ You MUST implement the following functions ----------------*/

/*------------ if porting to a new platform. ----------------*/

/*------------ (see platform/unix.c for an example) ----------------*/

/*------------ ----------------*/

/*--------------------------------------------------------------------------*/

/*--------------------------------------------------------------------------*/

/*

* The dir separator; "/" on unix, "\\" on win32, ":" on MacOS, etc...

* Obviously, this isn't a function, but it IS a null-terminated string.

*/

extern const char *__PHYSFS_platformDirSeparator;

/*

* Initialize the platform. This is called when PHYSFS_init() is called from

* the application. You can use this to (for example) determine what version

* of Windows you're running.

*

* Return zero if there was a catastrophic failure (which prevents you from

* functioning at all), and non-zero otherwise.

*/

int __PHYSFS_platformInit(void);

/*

* Deinitialize the platform. This is called when PHYSFS_deinit() is called

* from the application. You can use this to clean up anything you've

* allocated in your platform driver.

*

* Return zero if there was a catastrophic failure (which prevents you from

* functioning at all), and non-zero otherwise.

*/

int __PHYSFS_platformDeinit(void);

/*

* Open a file for reading. (filename) is in platform-dependent notation. The

* file pointer should be positioned on the first byte of the file.

*

* The return value will be some platform-specific datatype that is opaque to

* the caller; it could be a (FILE *) under Unix, or a (HANDLE *) under win32.

*

* The same file can be opened for read multiple times, and each should have

* a unique file handle; this is frequently employed to prevent race

* conditions in the archivers.

*

* Call __PHYSFS_setError() and return (NULL) if the file can't be opened.

*/

void *__PHYSFS_platformOpenRead(const char *filename);

/*

* Open a file for writing. (filename) is in platform-dependent notation. If

* the file exists, it should be truncated to zero bytes, and if it doesn't

* exist, it should be created as a zero-byte file. The file pointer should

* be positioned on the first byte of the file.

*

* The return value will be some platform-specific datatype that is opaque to

* the caller; it could be a (FILE *) under Unix, or a (HANDLE *) under win32,

* etc.

*

* Opening a file for write multiple times has undefined results.

*

* Call __PHYSFS_setError() and return (NULL) if the file can't be opened.

*/

void *__PHYSFS_platformOpenWrite(const char *filename);

/*

* Open a file for appending. (filename) is in platform-dependent notation. If

* the file exists, the file pointer should be place just past the end of the

* file, so that the first write will be one byte after the current end of

* the file. If the file doesn't exist, it should be created as a zero-byte

* file. The file pointer should be positioned on the first byte of the file.

*

* The return value will be some platform-specific datatype that is opaque to

* the caller; it could be a (FILE *) under Unix, or a (HANDLE *) under win32,

* etc.

*

* Opening a file for append multiple times has undefined results.

*

* Call __PHYSFS_setError() and return (NULL) if the file can't be opened.

*/

void *__PHYSFS_platformOpenAppend(const char *filename);

/*

* Read more data from a platform-specific file handle. (opaque) should be

* cast to whatever data type your platform uses. Read a maximum of (count)

* objects of (size) 8-bit bytes to the area pointed to by (buffer). If there

* isn't enough data available, return the number of full objects read, and

* position the file pointer at the start of the first incomplete object.

* On success, return (count) and position the file pointer one byte past

* the end of the last read object. Return (-1) if there is a catastrophic

* error, and call __PHYSFS_setError() to describe the problem; the file

* pointer should not move in such a case.

*/

PHYSFS_sint64 __PHYSFS_platformRead(void *opaque, void *buffer,

PHYSFS_uint32 size, PHYSFS_uint32 count);

/*

* Write more data to a platform-specific file handle. (opaque) should be

* cast to whatever data type your platform uses. Write a maximum of (count)

* objects of (size) 8-bit bytes from the area pointed to by (buffer). If

* there isn't enough data available, return the number of full objects

* written, and position the file pointer at the start of the first

* incomplete object. Return (-1) if there is a catastrophic error, and call

* __PHYSFS_setError() to describe the problem; the file pointer should not

* move in such a case.

*/

PHYSFS_sint64 __PHYSFS_platformWrite(void *opaque, const void *buffer,

PHYSFS_uint32 size, PHYSFS_uint32 count);

/*

* Set the file pointer to a new position. (opaque) should be cast to

* whatever data type your platform uses. (pos) specifies the number

* of 8-bit bytes to seek to from the start of the file. Seeking past the

* end of the file is an error condition, and you should check for it.

*

* Not all file types can seek; this is to be expected by the caller.

*

* On error, call __PHYSFS_setError() and return zero. On success, return

* a non-zero value.

*/

int __PHYSFS_platformSeek(void *opaque, PHYSFS_uint64 pos);

/*

* Get the file pointer's position, in an 8-bit byte offset from the start of

* the file. (opaque) should be cast to whatever data type your platform

* uses.

*

* Not all file types can "tell"; this is to be expected by the caller.

*

* On error, call __PHYSFS_setError() and return zero. On success, return

* a non-zero value.

*/

PHYSFS_sint64 __PHYSFS_platformTell(void *opaque);

/*

* Determine the current size of a file, in 8-bit bytes, from an open file.

*

* The caller expects that this information may not be available for all

* file types on all platforms.

*

* Return -1 if you can't do it, and call __PHYSFS_setError(). Otherwise,

* return the file length in 8-bit bytes.

*/

PHYSFS_sint64 __PHYSFS_platformFileLength(void *handle);

/*

* Determine if a file is at EOF. (opaque) should be cast to whatever data

* type your platform uses.

*

* The caller expects that there was a short read before calling this.

*

* Return non-zero if EOF, zero if it is _not_ EOF.

*/

int __PHYSFS_platformEOF(void *opaque);

/*

* Flush any pending writes to disk. (opaque) should be cast to whatever data

* type your platform uses. Be sure to check for errors; the caller expects

* that this function can fail if there was a flushing error, etc.

*

* Return zero on failure, non-zero on success.

*/

int __PHYSFS_platformFlush(void *opaque);

/*

* Flush and close a file. (opaque) should be cast to whatever data type

* your platform uses. Be sure to check for errors when closing; the

* caller expects that this function can fail if there was a flushing

* error, etc.

*

* You should clean up all resources associated with (opaque).

*

* Return zero on failure, non-zero on success.

*/

int __PHYSFS_platformClose(void *opaque);

/*

* Platform implementation of PHYSFS_getCdRomDirs()...

* See physfs.h. The retval should be freeable via PHYSFS_freeList().

*/

char **__PHYSFS_platformDetectAvailableCDs(void);

/*

* Calculate the base dir, if your platform needs special consideration.

* Just return NULL if the standard routines will suffice. (see

* calculateBaseDir() in physfs.c ...)

* Caller will free() the retval if it's not NULL.

*/

char *__PHYSFS_platformCalcBaseDir(const char *argv0);

/*

* Get the platform-specific user name.

* Caller will free() the retval if it's not NULL. If it's NULL, the username

* will default to "default".

*/

char *__PHYSFS_platformGetUserName(void);

/*

* Get the platform-specific user dir.

* Caller will free() the retval if it's not NULL. If it's NULL, the userdir

* will default to basedir/username.

*/

char *__PHYSFS_platformGetUserDir(void);

/*

* Return a number that uniquely identifies the current thread.

* On a platform without threading, (1) will suffice. These numbers are

* arbitrary; the only requirement is that no two threads have the same

* number.

*/

PHYSFS_uint64 __PHYSFS_platformGetThreadID(void);

/*

* This is a pass-through to whatever stricmp() is called on your platform.

*/

int __PHYSFS_platformStricmp(const char *str1, const char *str2);

/*

* Return non-zero if filename (in platform-dependent notation) exists.

* Symlinks should be followed; if what the symlink points to is missing,

* then the retval is false.

*/

int __PHYSFS_platformExists(const char *fname);

/*

* Return the last modified time (in seconds since the epoch) of a file.

* Returns -1 on failure. (fname) is in platform-dependent notation.

* Symlinks should be followed; if what the symlink points to is missing,

* then the retval is -1.

*/

PHYSFS_sint64 __PHYSFS_platformGetLastModTime(const char *fname);

/*

* Return non-zero if filename (in platform-dependent notation) is a symlink.

*/

int __PHYSFS_platformIsSymLink(const char *fname);

/*

* Return non-zero if filename (in platform-dependent notation) is a symlink.

* Symlinks should be followed; if what the symlink points to is missing,

* or isn't a directory, then the retval is false.

*/

int __PHYSFS_platformIsDirectory(const char *fname);

/*

* Convert (dirName) to platform-dependent notation, then prepend (prepend)

* and append (append) to the converted string.

*

* So, on Win32, calling:

* __PHYSFS_platformCvtToDependent("C:\", "my/files", NULL);

* ...will return the string "C:\my\files".

*

* This can be implemented in a platform-specific manner, so you can get

* get a speed boost that the default implementation can't, since

* you can make assumptions about the size of strings, etc..

*

* Platforms that choose not to implement this may just call

* __PHYSFS_convertToDependent() as a passthrough, which may fit the bill

* already.

*

* Be sure to free() the return value when done with it.

*/

char *__PHYSFS_platformCvtToDependent(const char *prepend,

const char *dirName,

const char *append);

/*

* Make the current thread give up a timeslice. This is called in a loop

* while waiting for various external forces to get back to us.

*/

void __PHYSFS_platformTimeslice(void);

/*

* Enumerate a directory of files. This follows the rules for the

* DirFunctions->enumerateFiles() method (see above), except that the

* (dirName) that is passed to this function is converted to

* platform-DEPENDENT notation by the caller. The DirFunctions version

* uses platform-independent notation. Note that ".", "..", and other

* metaentries should always be ignored.

*/

LinkedStringList *__PHYSFS_platformEnumerateFiles(const char *dirname,

int omitSymLinks);

/*

* Get the current working directory. The return value should be an

* absolute path in platform-dependent notation. The caller will deallocate

* the return value with the standard C runtime free() function when it

* is done with it.

* On error, return NULL and set the error message.

*/

char *__PHYSFS_platformCurrentDir(void);

/*

* Get the real physical path to a file. (path) is specified in

* platform-dependent notation, as should your return value be.

* All relative paths should be removed, leaving you with an absolute

* path. Symlinks should be resolved, too, so that the returned value is

* the most direct path to a file.

* The return value will be deallocated with the standard C runtime free()

* function when the caller is done with it.

* On error, return NULL and set the error message.

*/

char *__PHYSFS_platformRealPath(const char *path);

/*

* Make a directory in the actual filesystem. (path) is specified in

* platform-dependent notation. On error, return zero and set the error

* message. Return non-zero on success.

*/

int __PHYSFS_platformMkDir(const char *path);

/*

* Remove a file or directory entry in the actual filesystem. (path) is

* specified in platform-dependent notation. Note that this deletes files

* _and_ directories, so you might need to do some determination.

* Non-empty directories should report an error and not delete themselves

* or their contents.

*

* Deleting a symlink should remove the link, not what it points to.

*

* On error, return zero and set the error message. Return non-zero on success.

*/

int __PHYSFS_platformDelete(const char *path);

/*

* Create a platform-specific mutex. This can be whatever datatype your

* platform uses for mutexes, but it is cast to a (void *) for abstractness.

*

* Return (NULL) if you couldn't create one. Systems without threads can

* return any arbitrary non-NULL value.

*/

void *__PHYSFS_platformCreateMutex(void);

/*

* Destroy a platform-specific mutex, and clean up any resources associated

* with it. (mutex) is a value previously returned by

* __PHYSFS_platformCreateMutex(). This can be a no-op on single-threaded

* platforms.

*/

void __PHYSFS_platformDestroyMutex(void *mutex);

/*

* Grab possession of a platform-specific mutex. Mutexes should be recursive;

* that is, the same thread should be able to call this function multiple

* times in a row without causing a deadlock. This function should block

* until a thread can gain possession of the mutex.

*

* Return non-zero if the mutex was grabbed, zero if there was an

* unrecoverable problem grabbing it (this should not be a matter of

* timing out! We're talking major system errors; block until the mutex

* is available otherwise.)

*

* _DO NOT_ call __PHYSFS_setError() in here! Since setError calls this

* function, you'll cause an infinite recursion. This means you can't

* use the BAIL_*MACRO* macros, either.

*/

int __PHYSFS_platformGrabMutex(void *mutex);

/*

* Relinquish possession of the mutex when this method has been called

* once for each time that platformGrabMutex was called. Once possession has

* been released, the next thread in line to grab the mutex (if any) may

* proceed.

*

* _DO NOT_ call __PHYSFS_setError() in here! Since setError calls this

* function, you'll cause an infinite recursion. This means you can't

* use the BAIL_*MACRO* macros, either.

*/

void __PHYSFS_platformReleaseMutex(void *mutex);

#ifdef __cplusplus

}

#endif

#endif

/* end of physfs_internal.h ... */