# Local macros for the SDL configure.in script

dnl Function to link an architecture specific file

dnl LINK_ARCH_SRC(source_dir, arch, source_file)

AC_DEFUN(COPY_ARCH_SRC,

[

  echo "Copying $1/$2/$3 -> $1/$3"

  old="$srcdir/$1/$2/$3"

  new="$srcdir/$1/$3"

  cat >$new <<__EOF__

/* WARNING:  This file was automatically generated!

 * Original: $old

 */

__EOF__

  cat >>$new <$old

])

#

# --- esd.m4 ---

#

# Configure paths for ESD

# Manish Singh    98-9-30

# stolen back from Frank Belew

# stolen from Manish Singh

# Shamelessly stolen from Owen Taylor

dnl AM_PATH_ESD([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])

dnl Test for ESD, and define ESD_CFLAGS and ESD_LIBS

dnl

AC_DEFUN(AM_PATH_ESD,

[dnl 

dnl Get the cflags and libraries from the esd-config script

dnl

AC_ARG_WITH(esd-prefix,[  --with-esd-prefix=PFX   Prefix where ESD is installed (optional)],

            esd_prefix="$withval", esd_prefix="")

AC_ARG_WITH(esd-exec-prefix,[  --with-esd-exec-prefix=PFX Exec prefix where ESD is installed (optional)],

            esd_exec_prefix="$withval", esd_exec_prefix="")

AC_ARG_ENABLE(esdtest, [  --disable-esdtest       Do not try to compile and run a test ESD program],

		    , enable_esdtest=yes)

  if test x$esd_exec_prefix != x ; then

     esd_args="$esd_args --exec-prefix=$esd_exec_prefix"

     if test x${ESD_CONFIG+set} != xset ; then

        ESD_CONFIG=$esd_exec_prefix/bin/esd-config

     fi

  fi

  if test x$esd_prefix != x ; then

     esd_args="$esd_args --prefix=$esd_prefix"

     if test x${ESD_CONFIG+set} != xset ; then

        ESD_CONFIG=$esd_prefix/bin/esd-config

     fi

  fi

  AC_PATH_PROG(ESD_CONFIG, esd-config, no)

  min_esd_version=ifelse([$1], ,0.2.7,$1)

  AC_MSG_CHECKING(for ESD - version >= $min_esd_version)

  no_esd=""

  if test "$ESD_CONFIG" = "no" ; then

    no_esd=yes

  else

    ESD_CFLAGS=`$ESD_CONFIG $esdconf_args --cflags`

    ESD_LIBS=`$ESD_CONFIG $esdconf_args --libs`

    esd_major_version=`$ESD_CONFIG $esd_args --version | \

           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`

    esd_minor_version=`$ESD_CONFIG $esd_args --version | \

           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`

    esd_micro_version=`$ESD_CONFIG $esd_config_args --version | \

           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`

    if test "x$enable_esdtest" = "xyes" ; then

      ac_save_CFLAGS="$CFLAGS"

      ac_save_LIBS="$LIBS"

      CFLAGS="$CFLAGS $ESD_CFLAGS"

      LIBS="$LIBS $ESD_LIBS"

dnl

dnl Now check if the installed ESD is sufficiently new. (Also sanity

dnl checks the results of esd-config to some extent

dnl

      rm -f conf.esdtest

      AC_TRY_RUN([

#include <stdio.h>

#include <stdlib.h>

#include <string.h>

#include <esd.h>

char*

my_strdup (char *str)

{

  char *new_str;

  if (str)

    {

      new_str = malloc ((strlen (str) + 1) * sizeof(char));

      strcpy (new_str, str);

    }

  else

    new_str = NULL;

  return new_str;

}

int main ()

{

  int major, minor, micro;

  char *tmp_version;

  system ("touch conf.esdtest");

  /* HP/UX 9 (%@#!) writes to sscanf strings */

  tmp_version = my_strdup("$min_esd_version");

  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {

     printf("%s, bad version string\n", "$min_esd_version");

     exit(1);

   }

   if (($esd_major_version > major) ||

      (($esd_major_version == major) && ($esd_minor_version > minor)) ||

      (($esd_major_version == major) && ($esd_minor_version == minor) && ($esd_micro_version >= micro)))

    {

      return 0;

    }

  else

    {

      printf("\n*** 'esd-config --version' returned %d.%d.%d, but the minimum version\n", $esd_major_version, $esd_minor_version, $esd_micro_version);

      printf("*** of ESD required is %d.%d.%d. If esd-config is correct, then it is\n", major, minor, micro);

      printf("*** best to upgrade to the required version.\n");

      printf("*** If esd-config was wrong, set the environment variable ESD_CONFIG\n");

      printf("*** to point to the correct copy of esd-config, and remove the file\n");

      printf("*** config.cache before re-running configure\n");

      return 1;

    }

}

],, no_esd=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])

       CFLAGS="$ac_save_CFLAGS"

       LIBS="$ac_save_LIBS"

     fi

  fi

  if test "x$no_esd" = x ; then

     AC_MSG_RESULT(yes)

     ifelse([$2], , :, [$2])     

  else

     AC_MSG_RESULT(no)

     if test "$ESD_CONFIG" = "no" ; then

       echo "*** The esd-config script installed by ESD could not be found"

       echo "*** If ESD was installed in PREFIX, make sure PREFIX/bin is in"

       echo "*** your path, or set the ESD_CONFIG environment variable to the"

       echo "*** full path to esd-config."

     else

       if test -f conf.esdtest ; then

        :

       else

          echo "*** Could not run ESD test program, checking why..."

          CFLAGS="$CFLAGS $ESD_CFLAGS"

          LIBS="$LIBS $ESD_LIBS"

          AC_TRY_LINK([

#include <stdio.h>

#include <esd.h>

],      [ return 0; ],

        [ echo "*** The test program compiled, but did not run. This usually means"

          echo "*** that the run-time linker is not finding ESD or finding the wrong"

          echo "*** version of ESD. If it is not finding ESD, you'll need to set your"

          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"

          echo "*** to the installed location  Also, make sure you have run ldconfig if that"

          echo "*** is required on your system"

	  echo "***"

          echo "*** If you have an old version installed, it is best to remove it, although"

          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],

        [ echo "*** The test program failed to compile or link. See the file config.log for the"

          echo "*** exact error that occured. This usually means ESD was incorrectly installed"

          echo "*** or that you have moved ESD since it was installed. In the latter case, you"

          echo "*** may want to edit the esd-config script: $ESD_CONFIG" ])

          CFLAGS="$ac_save_CFLAGS"

          LIBS="$ac_save_LIBS"

       fi

     fi

     ESD_CFLAGS=""

     ESD_LIBS=""

     ifelse([$3], , :, [$3])

  fi

  AC_SUBST(ESD_CFLAGS)

  AC_SUBST(ESD_LIBS)

  rm -f conf.esdtest

])

## libtool.m4 - Configure libtool for the target system. -*-Shell-script-*-

## Copyright (C) 1996-1999, 2000 Free Software Foundation, Inc.

## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996

##

## This program is free software; you can redistribute it and/or modify

## it under the terms of the GNU General Public License as published by

## the Free Software Foundation; either version 2 of the License, or

## (at your option) any later version.

##

## This program is distributed in the hope that it will be useful, but

## WITHOUT ANY WARRANTY; without even the implied warranty of

## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU

## General Public License for more details.

##

## You should have received a copy of the GNU General Public License

## along with this program; if not, write to the Free Software

## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.

##

## As a special exception to the GNU General Public License, if you

## distribute this file as part of a program that contains a

## configuration script generated by Autoconf, you may include it under

## the same distribution terms that you use for the rest of that program.

# serial 40 AC_PROG_LIBTOOL

AC_DEFUN(AC_PROG_LIBTOOL,

[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl

# Save cache, so that ltconfig can load it

AC_CACHE_SAVE

# Actually configure libtool.  ac_aux_dir is where install-sh is found.

CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \

LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \

LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \

DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \

${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \

$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \

|| AC_MSG_ERROR([libtool configure failed])

# Reload cache, that may have been modified by ltconfig

AC_CACHE_LOAD

# This can be used to rebuild libtool when needed

LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"

# Always use our own libtool.

LIBTOOL='$(SHELL) $(top_builddir)/libtool'

AC_SUBST(LIBTOOL)dnl

# Redirect the config.log output again, so that the ltconfig log is not

# clobbered by the next message.

exec 5>>./config.log

])

AC_DEFUN(AC_LIBTOOL_SETUP,

[AC_PREREQ(2.13)dnl

AC_REQUIRE([AC_ENABLE_SHARED])dnl

AC_REQUIRE([AC_ENABLE_STATIC])dnl

AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl

AC_REQUIRE([AC_CANONICAL_HOST])dnl

AC_REQUIRE([AC_CANONICAL_BUILD])dnl

AC_REQUIRE([AC_PROG_RANLIB])dnl

AC_REQUIRE([AC_PROG_CC])dnl

AC_REQUIRE([AC_PROG_LD])dnl

AC_REQUIRE([AC_PROG_NM])dnl

AC_REQUIRE([AC_PROG_LN_S])dnl

dnl

case "$target" in

NONE) lt_target="$host" ;;

*) lt_target="$target" ;;

esac

# Check for any special flags to pass to ltconfig.

libtool_flags="--cache-file=$cache_file"

test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"

test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"

test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"

test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"

test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"

ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],

[libtool_flags="$libtool_flags --enable-dlopen"])

ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],

[libtool_flags="$libtool_flags --enable-win32-dll"])

AC_ARG_ENABLE(libtool-lock,

  [  --disable-libtool-lock  avoid locking (might break parallel builds)])

test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"

test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"

# Some flags need to be propagated to the compiler or linker for good

# libtool support.

case "$lt_target" in

*-*-irix6*)

  # Find out which ABI we are using.

  echo '[#]line __oline__ "configure"' > conftest.$ac_ext

  if AC_TRY_EVAL(ac_compile); then

    case "`/usr/bin/file conftest.o`" in

    *32-bit*)

      LD="${LD-ld} -32"

      ;;

    *N32*)

      LD="${LD-ld} -n32"

      ;;

    *64-bit*)

      LD="${LD-ld} -64"

      ;;

    esac

  fi

  rm -rf conftest*

  ;;

*-*-sco3.2v5*)

  # On SCO OpenServer 5, we need -belf to get full-featured binaries.

  SAVE_CFLAGS="$CFLAGS"

  CFLAGS="$CFLAGS -belf"

  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,

    [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])])

  if test x"$lt_cv_cc_needs_belf" != x"yes"; then

    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf

    CFLAGS="$SAVE_CFLAGS"

  fi

  ;;

ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],

[*-*-cygwin* | *-*-mingw*)

  AC_CHECK_TOOL(DLLTOOL, dlltool, false)

  AC_CHECK_TOOL(AS, as, false)

  AC_CHECK_TOOL(OBJDUMP, objdump, false)

  ;;

])

esac

])

# AC_LIBTOOL_DLOPEN - enable checks for dlopen support

AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])

# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's

AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])

# AC_ENABLE_SHARED - implement the --enable-shared flag

# Usage: AC_ENABLE_SHARED[(DEFAULT)]

#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to

#   `yes'.

AC_DEFUN(AC_ENABLE_SHARED, [dnl

define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl

AC_ARG_ENABLE(shared,

changequote(<<, >>)dnl

<<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],

changequote([, ])dnl

[p=${PACKAGE-default}

case "$enableval" in

yes) enable_shared=yes ;;

no) enable_shared=no ;;

*)

  enable_shared=no

  # Look at the argument we got.  We use all the common list separators.

  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"

  for pkg in $enableval; do

    if test "X$pkg" = "X$p"; then

      enable_shared=yes

    fi

  done

  IFS="$ac_save_ifs"

  ;;

esac],

enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl

])

# AC_DISABLE_SHARED - set the default shared flag to --disable-shared

AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl

AC_ENABLE_SHARED(no)])

# AC_ENABLE_STATIC - implement the --enable-static flag

# Usage: AC_ENABLE_STATIC[(DEFAULT)]

#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to

#   `yes'.

AC_DEFUN(AC_ENABLE_STATIC, [dnl

define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl

AC_ARG_ENABLE(static,

changequote(<<, >>)dnl

<<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],

changequote([, ])dnl

[p=${PACKAGE-default}

case "$enableval" in

yes) enable_static=yes ;;

no) enable_static=no ;;

*)

  enable_static=no

  # Look at the argument we got.  We use all the common list separators.

  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"

  for pkg in $enableval; do

    if test "X$pkg" = "X$p"; then

      enable_static=yes

    fi

  done

  IFS="$ac_save_ifs"

  ;;

esac],

enable_static=AC_ENABLE_STATIC_DEFAULT)dnl

])

# AC_DISABLE_STATIC - set the default static flag to --disable-static

AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl

AC_ENABLE_STATIC(no)])

# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag

# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]

#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to

#   `yes'.

AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl

define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl

AC_ARG_ENABLE(fast-install,

changequote(<<, >>)dnl

<<  --enable-fast-install[=PKGS]  optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],

changequote([, ])dnl

[p=${PACKAGE-default}

case "$enableval" in

yes) enable_fast_install=yes ;;

no) enable_fast_install=no ;;

*)

  enable_fast_install=no

  # Look at the argument we got.  We use all the common list separators.

  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"

  for pkg in $enableval; do

    if test "X$pkg" = "X$p"; then

      enable_fast_install=yes

    fi

  done

  IFS="$ac_save_ifs"

  ;;

esac],

enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl

])

# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install

AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl

AC_ENABLE_FAST_INSTALL(no)])

# AC_PROG_LD - find the path to the GNU or non-GNU linker

AC_DEFUN(AC_PROG_LD,

[AC_ARG_WITH(gnu-ld,

[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],

test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)

AC_REQUIRE([AC_PROG_CC])dnl

AC_REQUIRE([AC_CANONICAL_HOST])dnl

AC_REQUIRE([AC_CANONICAL_BUILD])dnl

ac_prog=ld

if test "$ac_cv_prog_gcc" = yes; then

  # Check if gcc -print-prog-name=ld gives a path.

  AC_MSG_CHECKING([for ld used by GCC])

  DELCR='tr -d \015'

  ac_prog=`($CC -print-prog-name=ld | $DELCR) 2>&5`

  case "$ac_prog" in

    # Accept absolute paths.

changequote(,)dnl

    [\\/]* | [A-Za-z]:[\\/]*)

      re_direlt='/[^/][^/]*/\.\./'

changequote([,])dnl

      # Canonicalize the path of ld

      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`

      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do

	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`

      done

      test -z "$LD" && LD="$ac_prog"

      ;;

  "")

    # If it fails, then pretend we aren't using GCC.

    ac_prog=ld

    ;;

  *)

    # If it is relative, then search for the first ld in PATH.

    with_gnu_ld=unknown

    ;;

  esac

elif test "$with_gnu_ld" = yes; then

  AC_MSG_CHECKING([for GNU ld])

else

  AC_MSG_CHECKING([for non-GNU ld])

fi

AC_CACHE_VAL(ac_cv_path_LD,

[if test -z "$LD"; then

  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"

  for ac_dir in $PATH; do

    test -z "$ac_dir" && ac_dir=.

    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then

      ac_cv_path_LD="$ac_dir/$ac_prog"

      # Check to see if the program is GNU ld.  I'd rather use --version,

      # but apparently some GNU ld's only accept -v.

      # Break only if it was the GNU/non-GNU ld that we prefer.

      if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then

	test "$with_gnu_ld" != no && break

      else

	test "$with_gnu_ld" != yes && break

      fi

    fi

  done

  IFS="$ac_save_ifs"

else

  ac_cv_path_LD="$LD" # Let the user override the test with a path.

fi])

LD="$ac_cv_path_LD"

if test -n "$LD"; then

  AC_MSG_RESULT($LD)

else

  AC_MSG_RESULT(no)

fi

test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])

AC_PROG_LD_GNU

])

AC_DEFUN(AC_PROG_LD_GNU,

[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,

[# I'd rather use --version here, but apparently some GNU ld's only accept -v.

if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then

  ac_cv_prog_gnu_ld=yes

else

  ac_cv_prog_gnu_ld=no

fi])

])

# AC_PROG_NM - find the path to a BSD-compatible name lister

AC_DEFUN(AC_PROG_NM,

[AC_MSG_CHECKING([for BSD-compatible nm])

AC_CACHE_VAL(ac_cv_path_NM,

[if test -n "$NM"; then

  # Let the user override the test.

  ac_cv_path_NM="$NM"

else

  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"

  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do

    test -z "$ac_dir" && ac_dir=.

    if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then

      # Check to see if the nm accepts a BSD-compat flag.

      # Adding the `sed 1q' prevents false positives on HP-UX, which says:

      #   nm: unknown option "B" ignored

      if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then

	ac_cv_path_NM="$ac_dir/nm -B"

	break

      elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then

	ac_cv_path_NM="$ac_dir/nm -p"

	break

      else